Contractors can’t afford to take risks on products that won’t withstand harsh “in use” environments, given the stringent demands of a commercial building. That’s why Fortifiber has developed Fortiflash Waterproof Flashing Membrane Commercial, the industry’s most advanced self-adhesive flashing for industrial applications.
The FortiFlash Commercial waterproof blinking membrane establishes a new trend in the industry. FortiFlash Commercial is designed to withstand temperatures up to 176°F (80°C) in “in service†applications and satisfies the maximum temperature standards of the American Architectural Manufacturers Association 711 specification for self-adhesive flashing. It was created by Fortifiber Building Systems Group® as an element of a comprehensive wall moisture control system. When integrated into the built environment, our solutions help to control and eliminate moisture-related concerns including water-related design deficiencies, mold, and fungus. Our commitment to creating a product that meets ASTM, AAMA, & practical requirements is unwavering.
requirements is reflected in the nature of FortiFlash Commercial.
Through this article, we will go through these elements
- Consider When To Buy Fortiflash Waterproof Flashing Membrane
- Fortiflash Waterproof Flashing Membrane Review
- Features & Benefits Of Fortiflash Waterproof Flashing Membrane
- Alternative Products Which Can Replace For Fortiflash Waterproof Flashing Membrane
- Final Statment About Fortiflash Waterproof Flashing Membrane
Table of Contents
Consider When To Buy Fortiflash Waterproof Flashing Membrane
The FortiFlash Waterproof Flashing Membrane is intended for use as a hidden flashing in frame construction where a waterproof membrane is desired. It has a self-sealing rubberized asphalt center.
The Henry FortiFlash Waterproof Flashing Membrane is designed to provide long-term, cost-effective security against water penetration in the harshest conditions. FortiFlash is suitable for use around windows and doors, as well as not a proofing horizontal applications like pot racks, parapets, sill pan, and windows, thanks to its self-adhesive installation. Or used in conjunction with the Fortifiber® 1-2-3 Moisture Control SystemTM by Henkel, the FortiFlash Waterproof Flashing Membrane is simple to install and comes with an industry-leading 15-year guarantee that protects faulty products and includes all components and labor for warranted fixes.
The usefulness
FortiFlash Waterproof Flashing Membrane can be mounted around protrusions even through the tightest corners without delaminating or breaking because it is reinforced by an extremely durable cross-laminated high-density polyethylene sheet. Its self-sealing rubberized asphalt center keeps it in place even in the most extreme weather. It comes in six different widths: six, nine, twelve, and eighteen inches.
A component of a comprehensive moisture-control system
FortiFlash Waterproof Flashing Membrane Commercial is part of Fortifiber’s full system of flashing items and devices, which includes Moistop® Sealant and Liquid Flashing, as well as WeatherSmart® Commercial, both of which are planned to fulfill the stringent requirements of commercial architects and contractors. This is the first full moisture management device accessible in the market from a single source, and it was designed using construction technology and refined in the field. The machine, which is made up of suitable components, takes the guesswork out of choosing flashing, sealing materials, and weather-resistant barriers that can both work together and have reliable results.
Decades with Established effectiveness
The Fortifiber Building Systems Group distributes the FortiFlash Commercial offering. The organization has been a valued advisor to engineers, developers, and code officials thanks to its more than 75-year track record of demonstrated success, engineering experience, and functional know-how.
Other Factors
When that comes to selecting the best flickering reel, you have to consider:
UV protection
It is important to know what more UV safety a band roll has, particularly if the band is accessible for extended periods of time. Sunlight degrades such tapes and is less reliable with time if UV shielding is not incorporated into the film. Many things lead to the amount of UV security in a roll of tape and you need to know how much UV protection is crucial to you.
Bitumen vs. butyl vs. acrylic modified
Many entrepreneurs would prefer a more economical bitumen blink, consisting of oil and asphalt. It will therefore dry out with time, decreasing flickering performance.
Butyl adhesive technology will be the next phase, but not all butyls are produced in equal measure. While most butyl rubber materials are best attached to challenging polymers than changed bitumen and can be removed and adapted for duration installs, it is essential to look at the range of temperatures carefully. Some butyl adhesives have been improved and remain more resilient and robust at elevated temperatures in cold weather.
The safest blinking adhesive was its acrylic adhesive. It lasts the longest and has the widest temperature spectrum, but it’s still the most costly.
The temperature of Cold Weather plays a crucial role in selecting the correct flickering tape. Modified bitumen materials tend not to work well here in cold weather. Most become less adhesive at 50 degrees F and won’t stick much below 40 degrees F. The safest alternative for cold weather is a butyl-based (better) or paint (best).
Setting up
Last but not least, it is vital to properly update.
It is essential to obey the manufacturer’s installation directions to achieve successful results and ensure guaranteed coverage. Some are different from the product-by-product, but usually solve the same problems: assembly procedures, application conditions, and layer compatibility, as well as products that get into contact with the basement membrane.
Materials are particularly compatible with hard-to-bundle materials, and that is why finding the correct tape is as vital as proper installation.
In addition to having the correct kind of blinker, mounting is another important factor. Today each vendor appears to have a series of installation instructions to obey in order to maintain each product’s warranties.
Sounds simple enough, but not one “right” approach. Guidelines differ between suppliers and make the work of a contractor even harder. However, if in question, obey the directions of the maker. The International Residential Code (R613.1) includes the installation and flashing of windows “according to directions given by manufacturers.” Even if there was an issue, you have achieved what the building code requires.
The people of Fine Homebuilding send here a wonderful tutorial: Windows installation and flashing correctly
The heats and compatibility of products, especially in hard-to-band materials, are important when using flashing bands in these installations. We’ll discuss the fundamentals below, but here and here you will also find excellent detail and case studies.
Again, landscape and temperature perform important implementation functions. Modified bitumen products are not good in cold weather. Most become less adhesive at 50 degrees F and won’t stick much below 40 degrees F. If you do not deal for a tape that is specifically made for low-temperature use, butyl or acrylic products in cold weather are safer.
High temperatures may be a challenge, too. Normally modified bitumen will ooze at extreme temps, particularly when built with direct sunlight exposure metals. For instance, under metal roofs or facing windows west and south.
Butyl tapes are generally more durable at elevated temperatures but have higher limits as well.
Without being shaped especially for high heats, flickering tapes can start smoothing around 120°F and 180°F anywhere. While certain high-temperature formulations for consumer uses can withstand temperatures over 200°F, they are not usually as sticky or hard to find. If the producer does not release the maximum temperature, notify them directly or search for a certain commodity.
Substrates Any maker decides which construction materials are secure to adhere to. Strong wood, plywood, vinyl, and aluminum are mostly all right as long as they are safe, i.e. free from grease, dirt, or dust. Some producers say that concrete, masonry, and OSB can achieve better results when prepared, while others advocate preparing all substrates for best success, particularly in cold weather.
That said, it is worth remembering that activation is just one remedy; you could be able to minimize that move and save work if you pick the right tape.
Shingle
This solution often involves the top layer lining over the bottom material, such that the water runs naturally away from the structure of the building even though the adhesive connection falls. This is how products such as roof shingles, pine shingles, and horizontal sidings work—they naturally pour out the water. Flashing with peel-and-stick also simplifies certain junctions, but they’re not magical.”
Depending on the extent of the space to be covered, experts suggest scalloping penetration of the inside with the low-expansion foam sealant or collage. On the outside, blinkered and blinkered tapes are being used as parts of a properly designed shield against weather conditions. The diligence of sealing technologies, whether at walls, doors, or other places, is key in the creation and energy efficiency of an airtight enclosure.
Flashing and rising seaming tape
The 2012 International Building Code allows wall structures, including all fuel barrier components, to meet NFPA 285 specifications to influence the selection and application of such flashing and tape items. More energy efficiency for all structures, whether residential or industrial, freshly constructed or restored, is the focus of other regulations, i.e. the IECC and LEED.
This pattern is supported recently by experts at Principia Consulting:
What it really means is that building flashing and tapes move from “optional” building material to needed items.
Adhesives & Sealants Industry magazine recently enabled us to delve into tapestry construction patterns, in particular, rubber, butyl, and acrylic adhesive tapes. It’s clear to us that if consumers need more comfortable dwellings and building energy codes, U.S. builders would need to be trained on the newest building tapes, noticing variations in tapes’ consistency over time, the longevity of extremes, waterproof and airproof features, and more.
This being said, hybrid, lightweight materials that would provide link utilization, greater stretchability, and conformity are another theme. Flex tape, which is a blinking tape made of high-strength composite acrylic that can accommodate sills, curves, and corners with ease, facilitates assembly, and provides a smoother means of stitching incorrect surfaces.
It is evident that flickering tapes are crucial in the most wall, door, and window connections. Thus, their reliability is critical for the durability of these connections.
Fortiflash Waterproof Flashing Membrane Review
Even in the roughest circumstances, the Henry FortiFlash is intended to give long-term protection against water penetration. On the market, it’s the greatest personality waterproof window blinking membrane. It’s also great for flashing – things like pot racks, ramparts, sill pan, or slightly higher windows that aren’t covered by the roof. It’s great for sealing surrounding common through-wall penetrations including hose bibs, doors, electric boards, and outside lighting because of its excellent adherence. Despite this, FortiFlash seems to be the most cost-effective solution for the most stringent architectural requirements.
Because FortiFlash is reinforced with a robust cross-laminated raised polyethylene film, it may be placed round appendages and around the tightest corners without albinism or shattering. Even in the most harsh conditions, it’s own self-sealing asphalt concrete core maintains it in place. FortiFlash is available in 25 and 40 mil variants to match your specific requirements.
No products found.
FortiFlash can be applied at temperatures ranging from 40 degrees Fahrenheit (4.4 degrees Celsius) to 120 degrees Fahrenheit (48.9 degrees Celsius) for optimal adhesion. Use FortiFlash with caution in areas where it could be exposed to temperatures beyond its Service Temperature, such as hot climates or behind heat-absorbing fiber cement and metal sidings. As soon as possible, the product should be covered (exposure not to exceed 60 days). Inspect the substance for any degradation that may weaken its moisture-resistance properties. EPDM and versatile (plasticized) Polyvinyl Chloride (PVC) dependent membranes are not compliant with FortiFlash. Fasteners can not be used where the panels are mounted horizontally or with a slope of less than 60°. Any sealants are also incompatible with FortiFlash. For compatibility details, check with the sealant manufacturer.
If the volume of sealant used reaches the amount stated in Henry’s installation guide, direct application of sealer to the adhesive side of FortiFlash may be harmful. Please adhere to the position and quantity of sealant recommended in the installation guide. For any installation where sealant might come into contact with the FortiFlash adhesive, Henry highly advises using Moistop® Sealant.
Surfaces should be dry and clear of any debris or other particles that could conflict with adhesion, as well as any rough protrusions, prior to installation. There must be no voids, destroyed, or unsupported areas on the surfaces. Before you mount the membrane, make sure the surfaces are in good condition. Any substrates, such as gypsum board (including Dens-Glass Gold), concrete, and masonry, include the use of a primer. Test a tiny sample of FortiFlash in the field before applying it to some other substrate. Apply AquatacTM Primer or 3M Super 77® Spray Adhesive according to the manufacturer’s application directions if adhesion is insufficient. It is essential to re-prime some areas that were not filled with membrane the same day.
To apply FortiFlash, remove the release paper and push the membrane tightly against the substrate with a reasonable amount of strength.
Pros Of Fortiflash Waterproof Flashing Membrane
- Maximum water and leak protection
- Self-adhesive installation
- Self-seals around fastener
Cons Of Fortiflash Waterproof Flashing Membrane
- There is no report of this best Flashing Membrane
Features & Benefits Of Fortiflash Waterproof Flashing Membrane
Features & benefits
- Moisture security is very cost-effective.
- Flashing will stay in position without mechanical fasteners thanks to optimal adhesion.
- For long-lasting water tightness, self-seals around nails and fasteners.
- Tear tolerance is exceptional.
- Compliant with AAMA 711.
- Moistop® Sealant is compatible with it.
Composition
- Asphalt adhesive that is laminated to polyolefin film reinforce with a siliconized paper release sheet
Packaging
- 4 inches x 75′
- 6 inches x 75′
- 9 inches x 75′
- 12 inches x 75′
- 18 inches x 75′
- 36 inches x 75′
Weight (pounds per roll)
25 MIL
- 3.8 (4″), 5.7 (6″), 8.5 (9″), 11.4 (12″), 15 (18″), 30 (36″)
40 MIL
- 5.7 (4″),8.6 (6″), 13 (9″), 17 (12″), 26 (18″), 52 (36″)
How to use it
Preparation
A. Ensure all objects that move through the membrane are correctly and rigidly assembled, and that the substrate is free of projections and inconsistencies that could interfere with the membrane’s proper installation.
B. The surfaces should be dry and clear of any debris or other particles that could obstruct adhesion, as well as any sharp protrusions. There must be no voids, destroyed, or unsupported areas on the surfaces. Before you mount the membrane, make sure the surfaces are in good condition.
Installing
A. Install the blinking membrane according to the manufacturer’s instructions, smoothing it out to avoid creases or material bunching. Before you mount it, make sure it’s compatible with the materials around it. 1. Overlap the seams according to the flashing manufacturer’s instructions for the application. 2. Flashing: As directed by the manufacturer’s written instructions, industry-standard implementation procedures, or project-specific architectural information.
B. To add lighting, remove the release layer and force the membrane tightly against the substrate, using a metal or wood roller to apply adequate pressure around the whole membrane to maintain a continuous seal.
Many of the figures are based on specimens that have been prepared to ASTM requirements. They are not standards and can not be viewed as such. All facts and data used in this document are believed to be correct and trustworthy by Henry.
Alternative Products Which Can Replace For Fortiflash Waterproof Flashing Membrane
Besides The Marvelous Fortiflash Waterproof Flashing Membrane that use can use to protect your house. There are also some products which can replace for it available on the marketplace. Let’s check it
EternaBond RoofSeal White 4″ x50′
No products found.
RoofSeal is a product that can be used to seal either rip, tear or exposed seam on any wall. RoofSeal is the most effective leak-repair product on the market. On nearly all roof styles, like EPDM, TPO, Hypalon, most PVC, changed, all metals, including copper and Kynar coating metals, tile, timber, concrete, and so on, it is the preferred option of experienced roof repair specialists. RoofSeal is also effective on-ground fill and pond linings.
Also after 19 years of exposure to direct sunlight, our advanced backing has proved to be UV secure. RoofSeal has a built-in primer in our MicroSealant that helps it to bind to the surface it is mounted on. It’s ideal for re-sealing every kind of roof, regardless of the content. RoofSeal creates a watertight barrier that can last a lifetime.
Did you realize the RV roof seams ought to be maintained on a yearly basis? If you’ve applied RoofSeal to factory roof seams, you’ll never have to worry about roof seam repairs again. Upwards of 25 high-end RV producers already use EternaBond® materials in the construction of their dream machines, ensuring that their consumers get a weather-tight, leak-proof RV.
RoofSeal’s elongation factor of more than 700 percent ensures that it can stretch, extend, and contract under every situation! It can be deployed in temperatures as low as -20°F. A sag level of over 250°F is needed.
Pros
- Easy to work with
- In my opinion, this is the finest commodity on the market
- This is the perfect tape for keeping water out of a camper’s roof
Cons
- This product’s biggest flaw is that it will not adhere to silicone
Beech Lane RV Roof and Leak
RV Sealant Tape from Beech Lane permanently seals leaks.
RV leaks are permanently stopped with this water-resistant, mega white sealant tape.
As the installation instructions are followed, the proprietary self-priming technology binds immediately.
The tape’s unique lightweight construction makes DIY installation by the ordinary Joe a breeze.
Lifetime Manufacturer Warranty Designed especially for 20 years of sustained outdoor exposure and weather tolerance.
In colder conditions, the tape adheres further. It may be challenging for the tape to shape a full seal while the temperature is below 48°F.
When fully assembled, this tape is built to create a full seal around any leakage using an adhesive that is highly sticky.
To ensure that the tape is applied correctly, follow these steps:
Isopropyl alcohol was used to fully clean the floor and was then allowed to dry. Solvent residue, mineral spirits, rubber, waterproof fabrics, and solvent residue will all obstruct proper bonding.
Start by removing the transparent plastic filler and applying the tape.
To speed up the bonding process, apply strong pressure to the tape. If you skip this phase, you may not be able to get a complete seal with both the tape. If necessary, a steel roofer’s roller may be used.
Metals, EPDM, PVC, Hypalon, and TPO are also suitable for use with the tape. Silicone does not adhere to it. Mineral spirits and waterproof chemicals such as benzene, carbinol, ethylene, and silicone can not be included in the tape.
Floor washing can be done with denatured alcohol.
Pros
- It’s easy to make and put together
- There are no air bubbles on the floor, so it stays level
- There’s no need to cure it
- Most roofing materials are compatible with this product
- Stretches that fit around corners and into narrow spaces
Cons
- In snowy weather, it’s not a good idea to use it
DensDefy Liquid Flashing
No products found.
STP Technology is used to create a water-resistant and decoration compound that seals rough cracks, penetrations, joins, sheathing fasteners, and seams in new and current wall assemblies.
It adheres to the majority of construction materials, is simple to add to specific geometries, and is compliant with a variety of sealants, waterproofing, and air barrier elements.
It bonds and heals in inclement weather, on wet substrates, and it can withstand rain right after use. When subjected to regular weather conditions during development, it would not tear or lose its efficacy.
For up to 12 months, it can be vulnerable to UV and natural weather conditions.
The result is an extremely robust elastomeric blinking membrane. It does away with the need for joint reinforcement tape, which cuts down on installation time.
Pros
- Acceptance of rain within 24 hours of application
- 12-month tolerance to natural weather
- Many substrates are easily adhered to
Cons
- Concerns about quality
Gorilla Waterproof Patch
No products found.
It forms a lasting connection that seals out air, water, and humidity in a moment. Gorilla waterproof patch & seal tape is ideal for indoor and outdoor repairs, as well as repairs that include submersion.
The adhesive coating is extra dense, and the backing is UV resistant. To patch flaws, fractures, openings, and tears, it conforms to the floor. Repairs roof holes, pool liners made of rubber, acrylic, or vinyl, and even much. 2X more film than most 5 foot versatile tapes This item is also available in black.
Pros
- It’s easy to use
- Extremely powerful
- Resistant to water
Cons
- It’s possible that the underside would not be waterproof
Cofair Products
No products found.
TITE SEAL Is a waterproof blinking film made of rubberized asphalt that is self-adhesive. Its aluminized surface serves as a UV stabilizing agent, enabling for up to 180 days of exposure to sunlight before having to be sealed.
TITE SEAL is an excellent moisture seal across windows of both current and repair buildings. TITE SEAL could also be used as a house wrap beneath concrete, siding, stucco, or wood to seal cracks and other openings. It can be used to seal sills, tops, chimney shoulders, parapets, and other areas where a watertight seal is needed.
TITE SEAL may be used on a variety of vertical and horizontal surfaces, including timber, composite sheets, metal, vinyl, and masonry. That surface must be fresh, clean, and clear of oil, grease, and debris. In order to achieve a smooth, clean surface, dirty, dusty, or endured surfaces should indeed be primed as required with an air, polymer, or surfactant primer.
It’s possible that certain wood composite panels would need to be primed. When temperatures reach 35°F or above, TITE SEAL should be mounted. If the rolls are used in cold weather, they should be kept in a warm position before required, and the substrate and overlap should be warmed with a heat gun.
Simply peel away the releasing paper and push the item into position. A service knife or scissors may be used to break TITE SEAL. To ensure uninterrupted touch, roll fabrics with a hand roller. Start from the bottom and gradually build up to ensure the moisture runs over the laps. The bottom strip should be mounted first, followed by the side strips, which should cover the bottom strip. The head of the window may be the one to be out. There should also be four inches of the gap on both sides.
Pros
- Flashing that is self-adhesive and waterproof
- Stairs, windows, skylights, sheathing panels, and chimneys are all good candidates for this material
- It inhibits the growth of mold
- Drafts are no longer essential
- Keeps rain at bay
Cons
- None
Huber ZIP System Flashing Tape
- ZIP System Tape is ideal for both seam sealing and flashing
- Installation temperature range from 0 - 120 degrees Fahrenheit
- Advanced acrylic adhesive delivers superior bonding and resists heat and UV light
- Compatible with a wide range of materials and substrates, including PVC windows
- Withstands up to 180 days of direct UV exposure
The innovative acrylic adhesive used in ZIP System Tape provides a superior airtight and waterproof seal that withstands extreme weather in both roof and wall installations with a period of outstanding bonding.
ZIP System Tape is suitable for both seam wrapping and lighting, and it will save you time and resources on the project, allowing you to quit the job knowing that it can work for years to come. For added protection, the upper surface provides a strong tack during construction. The dimensional stabilization is provided by the thick inner layer. The binding layer is designed to provide a strong connection between the adhesive and the substrate.
Pros
- Slip-resistant design For protection, the top layer provides adequate tack during construction
- Protection from the elements and UV light The carbon black produces a sunscreen that covers the other layers, while the thick inner layer provides dimensional stability
- Durability in the Long Run The adhesive’s bonding layer is specifically designed to produce a long-lasting bond
- The advanced acrylic adhesive coating has a lifetime of outstanding bonding while still resisting heat and UV light
Cons
- None
Final Statement About Fortiflash Waterproof Flashing Membrane
That is the end of the post, Throughout our analysis and synthetic information. We hope that you could get more knowledge of Fortiflash Waterproof Flashing Membrane, which helps you to put forward decisions easier. Fortiflash Waterproof Flashing Membrane is a cost-effective product but has a strong useful purpose to ensure your house from water, that attacks through leaks of windows or proof. We hope you will enjoy it and find out for yourself the best products. Thank you and see you soon!!!
| Read Also: TOP 10 BEST SHILAJIT IN 2021 – WHICH ONE IS FOR YOU? MAUI JIM KNOCK OFFS WILL HELP YOU BE MORE COMFORTABLE UNDER THE SUNSHINE |
​