Visit our site to find reviews on staples office chair replacement parts. We have the top best staples office chair replacement parts comparison 2026 and you can make an informed decision!
That’s why we’ve taken 29773 reviews from top experts and organized them according to our rankings for you.
Bestseller No. 2
Replacement Hardware Repair Kit for Office Chair Gas Lift Cylinder - Includes Clip, washers, & Bearing - S4451-K - Hardware repair kit for office chair gas lift cylinders
- Contains: 1 Rubber Bumper, 1 Silver Washer, 2 Black Washers, 1 White Bearing Pack, 1 Retaining Clip
- Attachment hardware for lower area of office chair gas lift pneumatic cylinder
- These parts fit the large majority of standard gas lift cylinders in office chairs - Most but not all
- Note: Gas lift piston in picture is for visual purposes only and is not included. Only the hardware kit is included.
Bestseller No. 3
HOSALI Office Chair Cylinder Replacement, Heavy-Duty Office Chair Replacement Parts Gas Lift Cylinder, Highest End Class 4 Hydraulic Pneumatic Shock Piston, Universal Size Fits Most Chairs - REVIVE YOUR CHAIR FOR SAVING MONEY: If your chair or stool starts sinking, leaking gas or failing, replace a gas lift cylinder instead of spending money on a brand new computer chair. You need a chair that supports you while you're at work, or at home, our replacement chair cylinder is built to last a lifetime, without any unwanted sinking
- STANDARD CYLINDER THAT FITS MOST CHAIRS: This office chair piston will fit almost every office chair on the market included salon chairs, executive chairs, work chairs, rolling stools. Stop worrying about disturbing anyone, they can freely lift and rotate your office chair smoothly and quietly. ( Please measure the dimensions before purchasing)
- HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our office chair cylinder passed the top-level test of BIFMA certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs
- 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This desk chair cylinder extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches; maximum length when fully extended: 16.7 inches, allows you travel from the highest to the lowest point. Replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoothly and quietly
- EASY INSTALLATION & 100% WARRANTY: It comes with gloves and chair cylinder, spending 5 minutes will bring a new life to your old office chair. Your satisfaction is always our top priority. If for some reason the cylinder fails, leaks, or starts sinking, contact our professional after-service team via email, our direct after-sale team will reach out to you and timely solve your problems
Bestseller No. 4
Office Chair Arm Rest Replacement Fits All Styles of Arms with 4" Mounting Hole Patterns Screws Set Desk Armrest Cover(2Pack) - Only fits all styles of Arms with mounting hole patterns (center to center) 4". ❗𝙉𝙤𝙩 𝙨𝙪𝙞𝙩𝙖𝙗𝙡𝙚 𝙛𝙤𝙧 𝙖𝙧𝙢𝙨 𝙬𝙞𝙩𝙝 5" 𝙝𝙤𝙡𝙚 𝙖𝙣𝙙 5.5" 𝙝𝙤𝙡𝙚, Not suitable for electric wheelchairs. please measure the screw hole size of the chair before purchasing.Package includes 2 pcs pads with 4 pcs screws
- Package includes 2 pcs pads with 4 pcs screws
- Dimensions: 10" Long x 4" Wide, Cut Out on the underside for Arm Bracket: 5 7/8" LONG X 1 7/8" WIDE.
- Made with quality PU material, this Chair Arm Pad is solid enough that it won’t crack easily while providing comfortable support for your arms and elbows.
- Sold as a pair - Set of 2; left and right side are different
SaleBestseller No. 5
Omyoffice 5.5 inch Office Chair Gas Lift Cylinder-Office Chair Replacement Parts,Universal Size Fits Most Chairs,Heavy Duty Gas Lift Hydraulic/Pneumatic Piston(Black) - Adjustable height 5.5 IN: The height of the fully compressed chair piston is: 11.4 IN, the fully expanded height is: 16.9 IN, it has an adjustable height of 5.5 IN,which allows you to rise higher (Note: higher than normal cylinder, measured before purchase)
- Universal size: This hydraulic piston is suitable for almost all office chairs (salon chairs, executive chairs, work chairs, rolling stools) on the market, and has a better load-bearing capacity. The office chair piston maximum weight it supports is 1000 Lbs, which is much heavier than ordinary gas cylinder for office chair
- Official certification: Durable, the best quality gas lift cylinder, withstand higher weight and pressure, high safety and explosion-proof. The gas lift cylinder has passed SGS official test and BIFMA certification, and is made of high-quality thickened outer steel to ensure compliance with quality standards
- Excellent alternative office chair gas cylinder: Stable use, no noise, silent 360° rotation and aerodynamic impact, making the operation simple and smooth. No noise to colleagues even when turning or lying on a chair to rest
- High-quality Office chair gas cylinder: This is a quiet/durable/sturdy office desk gas cylinder. Able to work well in the office
Bestseller No. 6
SplendShop Office Chair Cylinder Repair Kit, 3Pcs Universal Size, Black Nylon, Adjustable Height, Up to 350 lbs, Modern Style, Office Use - FUNCITON:The gas lift mechanism in an office chair plays a crucial role in providing users with a comfortable and adjustable seating experience. However, encountering issues with the chair's gas lift mechanism, particularly the failure of its height adjustment function, can be highly inconvenient. The office pump fixing tool is made for your need
- EASY INSTALLTION: Installing this repair kit is very sample and can be done in less than a minute! No tools are needed and no prior knowledge is required. With just this repair kit, you will have everything you need for a quick and easy solution for your office chair restart use
- MATERIAL: Made from a durable high-strength nylon material, this product features exceptionally robust supporting sidewalls, ensuring a maximum weight capacity of up to 350 pounds give your comfortable office chair
- SIZE: office chair pump repair tool as it offers 3 different height(1inch/1.46inch/2inch) options and combinations for optimal comfort
- ENVIRONMENT FRIENDLY：By using office chair cylinder repair kit , you're not only saving money but also being environmentally conscious. The unnecessary disposal of chairs and gas cylinders contributes to waste and pollution. you're reducing waste and making a positive impact on the environment
Bestseller No. 7
Besitu 500Lbs Office Chair Replacement Parts, w/ 6'' x 10.2" Mounting Holes Chair Base Heavy Duty Plate Swivel Tilt Control Seat Mechanism for Executive and Gaming Chairs - 【STANDARD SIZE】Replacement office chair tilt mechanism fit for the office chair with 10.2" long x 6" wide screw mounting holes center distance. Please verify your mounting holes measurements before purchasing.
- 【HEAVY DUTY 500LBs】This swivel tilt seat mechanism is much sturdier that the average mechanism, with a thick, sturdy retaining collar where the lift cylinder fits into, being able to withstand 500 lbs of standard use. Also the tilt tension knob provides greater tension for a large person.
- 【TILT CONTROL MECHANISM】The bracket is made of the 0.12" thicken solid steel and last a long time. Even the handle rod is twice as thick. Single lever for gas lift cylinders height activation, accepts standard Dia. 28mm(1.1-Inch) tapered gas lift cylinders.
- 【TIME & MONEY SAVER】Saved time and money having to buy another expensive office or gaming chair. Just purchasing the part we needed and easily replaced the existing broken unit.
- 【ATTENTION】Please check bolt pattern and measure the seat mechanism size before ordering in case of not fitting. Contact us freely if you have any questions and problems.
Bestseller No. 8
MASTERY MART Heavy Duty Office Chair Base Replacement, 2500 Lbs, 28"(70 cm), Metal Desk Chair Base Replacement Parts with Universal Gas Cylinder Hole and Casters Sockets, Matte Black - 🥇【Universal Size】This gaming chair base replacement is compatible with most chairs on the market, such as Herman Miller office chairs, gaming chairs, desk chairs, and executive chairs. Fits casters with 7/16" x 7/8" (11 mm x 22 mm) stems and gas cylinders with a 2" (5 cm) diameter.
- 🥇【Durable and Sturdy Materials】This heavy-duty base is made of chrome-plated metal with a matte finish. The solid tubular iron structure is reinforced with screws, providing enhanced load-bearing capacity and safety. It can support up to 2500 lbs.
- 🥇【Ensure Safety and Prevent Scratches】An improper chair height can lead to an unstable center of gravity and floor damage. Our replacement base features a low center of gravity and enhanced stability, making your chair safer and preventing scratches—saving you the cost of buying a new chair.
- 🥇【Budget-Friendly Solution】Why replace the whole chair when you can fix it for 1/5 the cost? If your chair seat is still in good condition, replacing the base is a smart way to save money and keep your favorite chair.
- 🥇【100% Satisfaction Guaranteed】Our replacement base is easy to install with clear, step-by-step instructions. If this doesn't fit your chair, you can simply return it.
Bestseller No. 9
Office Chair Cylinder Replacement with Removal Tool (As Seen On PBS) - Heavy Duty Pneumatic Gas Lift Piston for Desk Chairs and Gaming Chairs - Universal Fit - ★ EASY REMOVAL & INSTALLATION - The only chair cylinder replacement on Amazon to offer a cylinder removal tool. No more struggling and spending hours trying to remove your chairs old broken cylinder with tools you don't have. We will also make sure to help guide you through the entire process from start to finish.
- ★ SAVE MONEY. REVIVE YOUR CHAIR - Fix your sinking office chair by replacing the cylinder instead of spending money on a brand new computer chair. We'll send you the highest quality cylinder on the market, our exclusive cylinder removal tool, detailed step-by-step installation instructions, gloves, and our money-back guarantee. You have nothing to lose!
- ★ INDUSTRY STANDARD SIZE - This pneumatic piston cylinder will fit almost every office chair on the market including herman miller aeron. The cylinder has a 1-1/8" (28mm) diameter piston shaft and a 2" (50mm) diameter column. If it doesn't fit your specific chair, no problem, we'll take care of you.
- ★ EXTRA HEAVY DUTY - Our desk chair cylinders are all Class 4, which are known as the most durable, longest lasting, & highest quality hydraulic gas lift cylinders. Cheaper options can start sinking within the first few months of use. Our's don't. They can even support up to 1000 lbs without fail.
- ★ LIFETIME WARRANTY - Our goal is to provide you with the highest quality office chair parts so you can extend the life of your chair. So if for some reason our cylinder fails, leaks, or starts sinking - email us, and we'll send you a brand new one. Our warranty has no expiration date.
Bestseller No. 10
TICONN Office Chair Cylinder Replacement, 650 Lbs Weight Capacity Heavy Duty Universal Fit Gas Lift Piston with Removal Tool, ANSI Certified (4-3/4" (120mm)) - [PREMIUM QUALITY AND CERTIFIED] The TICONN office chair cylinder replacement is made from premium-grade steel with ANSI and BIFMA certified, ensuring reliable strength and long-lasting performance. The max weight the cylinder can hold is 650 lbs.
- [HEIGHT ADJUSTMENT] Designed to optimize your sitting experience, our heavy duty office chair cylinder allows for smooth and seamless height adjustments. Choose 4-3/4'' or 5-1/2'' height to meet your needs. Find your ideal sitting position and maintain correct posture effortlessly.
- [UNIVERSAL FIT AND EASY INSTALLATION] Featuring a universal fit design, the TICONN Office Chair Cylinder Replacement is compatible with most standard office chairs on the market. The base diameter of the cyclinder is 1-5/8''. Whether you have a swivel chair, executive chair, or gaming chair, our replacement cylinder is here to rejuvenate your seating experience.
- [REMOVAL COLLARS FOR HASSLE-FREE REPLACEMENT] To make the installation process even easier, we've included convenient removal collars with the replacement cylinder. These collars enable effortless removal of the old cylinder, saving you time and frustration. Simply follow the easy-to-understand instructions provided, and you'll have your new cylinder installed in no time.
- [TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12 months warranty. 100% Satisfaction Guarantee for risk-free shopping!
With our guide, you can find the best staples office chair replacement parts available on the e-commerce market. We make use of Big Data and AI data to compile this list, so it is highly accurate.
The process of creating this content was challenging, but our team persevered through it to bring you the best possible results. We read user reviews and look at what buyers think about each product so that your buying experience will be satisfying.
