Visit our site to find reviews on mini jack plate. We have the top best mini jack plate comparison 2024 and you can make an informed decision!
That’s why we’ve taken 42394 reviews from top experts and organized them according to our rankings for you.
SaleBestseller No. 1
MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate for Outboard Motors Up to 35HP (Wooden Mounting Block Included) Manual Add Distance Between Engine and Transom - APPLICATION -- Designed for clamp-on outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables.
- WOODEN BLOCK INCLUDED -- Same as MJ-1-DP Jack Plate, Wooden Block Model # WOOD0002. Jack plate comes with pre-cut and pre-grooved wood block for a perfect fit. Ensure more firm and reliable installation of the motor.
- FUNCTION -- Extends 4" off transom. Small boat that made for short shaft outboard engine equipped with a long shaft engine which results in not optimal performance and handling. This jack plate is designed to firmly attach to the transom and provides a higher mounting position for the engine.
- BENEFITS -- Improves performance and handling of smaller or lighter boats. Allows long shaft motors mount to shorter shaft transom boats.
- 4" SETBACK -- The jack plate extends 4" off transom. Engine mounting surface is 11-1/2" x 10", 4" Setback and 3" Vertical. Width of transom mounting flanges is 17". Max weight capacity: 150 lbs.
Bestseller No. 3
MJ-1-DP 4'' Setback Small Engine Jack Plates Replacement for Outboard Motors Up to 35HP - Manual Add Distance Between Engine and Transom - Marine Grade Mounting Block - 【Compatible Models】: Designed for clamp-on mount outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables.
- 【High Quality Material】: This Heavy-Duty Transom Block is made of marine grade cast aluminum. Well-tested, reliable, high strength and anti-corrosion for much longer service time, designed for use in saltwater.
- 【Maximize Boat Performance & Lighter Handling】: Set back and raise the motor with the jack plate to decrease bow rise and squatting during takeoff, ensuring a faster hole shot. Jacking up the motor adds clearance for the skeg and prop, allowing the boat to run shallower and protect the engine. The right jack plate adjustment lets the prop reach higher rpm with less effort, boosting fuel efficiency.
- 【Easy to Install】: Easily mounts long shaft motors onto transom boats with shorter height/shaft. The jack plate bolts to the boat transom and then simply clamps and/or bolts the outboard motor engine.
- 【Jack Plates Specifications】: Setback: 4", Vertical Offset: 3". Engine mounting surface: 11-1/2" wide x 10" high. Overall transom mounting flanges width: 17". Come with a pre-cut wooden block.
Bestseller No. 4
VEPURLT Outboard Jack Plate JPL4000 Jack Plate Aluminum Jack Plates for Outboard Motors - Heavy-duty Construction: This jack plate outboard is made of high strength polished aircraft Quality Aluminum to ensure durability and longevity.
- Adjustable Design: Our jack plate offers multiple height adjustments, allowing you to find the perfect fit for your needs.
- Good Function: This jack plate will compensate for a long shaft engine.
- Easy Installation: The manual jack plate weighs 20 lbs. With a simple setup process, you'll have your jack plate installed in no time.
- Applicable Range: VEPURLT jack plate fit for 150 Maximum Horsepower outboard motors or boat equipment.
Bestseller No. 5
MJ-1-DP Mini Jack Plate for Jon Boat Outboard Motors, Lifts Engine up to 3" in Vertical Offset and Provides 4" of Setback, Cast Aluminum with Laminated Wood - Optimizes Performance - The MJ-1-DP Jack Plate allows you to customize the height and setback of the motor, enabling you to adjust the position of your boat's motor in relation to the water surface. Raising the motor helps reduce drag and improve the boat's hydrodynamics. Designed specifically to mount a long shaft outboard motor onto a boat with a short shaft transom, it effectively bridges the height difference, allowing for optimal motor placement while reducing the risk of cavitation and ensuring a smoother ride.
- Broad Compatibility - Tailored for clamp-on mount outboard motors (with a maximum engine size of up to 35 HP), it is well-suited for skiffs, aluminum boats, jon boats, and inflatables. It provides the necessary lift for a long shaft motor on a short transom aluminum boat, featuring a 4-inch extension between the motor and transom.
- Cast Aluminum Construction - Cast aluminum construction offers corrosion resistance and durable properties, combined with a high strength-to-weight ratio. It is highly resistant to corrosion, which is crucial for marine environments where exposure to water and salt can lead to rapid material degradation. Its durability ensures that it can withstand the harsh conditions typically encountered in marine settings.
- Key Steps and Suggestions - Start by clamping the Jack Plate in place to maintain correct positioning and stability during the drilling process. Using the pre-marked spots on the plate, drill holes accurately for optimal fit and performance. Install the plate with stainless bolts to provide durability and resistance to corrosion, and use large fender washers on the inside of the transom to distribute the load more evenly. Additionally, apply a good sealant in the drilled holes to prevent water from seeping into the transom. By following these steps and recommendations, you can ensure a secure and effective installation of the MJ-1-DP Jack Plate.
- Technical Support - If you encounter any issues during installation or use, please feel free to reach out to us. We will respond to your email within 24 hours, providing installation guidance and necessary non-professional support (please ensure our replacement parts are installed under the supervision of a qualified technician). We are also happy to listen to any concerns you may have. We hope you have a pleasant shopping experience with Bzcovac Store.
Bestseller No. 6
KUAFU 4'' Set Back Jack Plate Manual Power Lift Transom Outboard Boat Motor - Material: Aluminum; Package Size: 17.72’’ X 16.54’’ X5.12’’. Weight: 19.67kg; 4 inches of setback; 225 Maximum Horsepower. Instructions is included.
- Jack plates are the good solution for long shaft engines with a short shaft transom.
- With a convenient one piece design made of aluminum alloy and stainless steel fasteners for maximum corrosion resistance and durable.
- Adjusts easily by turning one steel bolt, offers 4 inches of adjustable vertical movement. Quick installation,easy slip-on. Replace your damaged or rusted one.
- Here are the pre-drilled hole dimensions listed below in inches: Pre-drilled holes for 1/2'' stainless hardware; 12 7/8'' across the top two holes from center to center; 9 7/8'' across the bottom two holes from center to center; 8'' of vertical distance between the top holes and bottom mounting holes.
Bestseller No. 7
MJ-1-DP JackerFixed Small Ship Engine Socket Plate is Suitable for manually Increasing The Distance Between Marine Engines and transmissions for Outboard Motors up to 35HP (Black) - ADJUSTABLE SETBACK: This jack plate allows you to manually adjust the engine's setback position between 0-4 inches from the transom for improved performance, handling, and shallow water capabilities.
- WIDENED STABILITY: By moving the engine weight farther away from the transom, this jack plate increases stability and reduces bow rise at speed for a smoother ride.
- SHALLOW WATER ACCESS: With up to 4 inches of adjustable setback, you can now access shallower shorelines and fishing spots that were previously inaccessible.
- UNIVERSAL FIT: Featuring a sturdy aluminum construction, this jack plate is designed to work with outboard motors up to 35HP and transoms from 40MM thick.
- Easy to install: This jack plate kit includes pre drilled rubber mounting blocks that simplify installation without the need for welding or special tools, just tighten it.
Bestseller No. 10
Fiberfly Jack Plate JPL4500 Manual Jack Plate Adjustable 6" Outboard Motor Jack Plate for Boat Steering System - 【High-Quality Material】-Made of high strength polished Aircraft Quality Aluminum
- 【ADJUSTMENT]-Offers 6 inches of adjustable Vertical movement
- 【FEATURE】-A jack plate will compensate for a long shaft engine
- 【WEIGHT】-The Manual Jack plate weighs 27 lbs, light and easily installation
- 【INSTALLATION】- Professional installation is highly recommended. ** Instructions NOT included.** Provide technical support at any time. Please feel free to tell us what we can do for you, we will reply in one business day. If your items encounter any adaptation and color difference or anything-else problems, please feel free to contact us.
With our guide, you can find the best mini jack plate available on the e-commerce market. We make use of Big Data and AI data to compile this list, so it is highly accurate.
The process of creating this content was challenging, but our team persevered through it to bring you the best possible results. We read user reviews and look at what buyers think about each product so that your buying experience will be satisfying.
