Visit our site to find reviews on leer cap replacement parts. We have the top best leer cap replacement parts comparison 2026 and you can make an informed decision!
That’s why we’ve taken 35057 reviews from top experts and organized them according to our rankings for you.
Bestseller No. 1
HIRABBIT 113436 Truck Cap Twist Handle That, Compatible with Leer Truck Caps 100XQ, 100XL, 100XR, and TSC700 with Striker Latches 83514/83515 (Black) - 【OEM Part Number】: 113436 83514 83515
- 【Applicable Models】: For Leer Truck Caps 100XQ, 100XL, 100XR, and TSC700
- 【High Quality】: This twist handle kit is built to last with rugged plastic and high-quality aluminum & steel materials. Sturdy latch mechanism design ensures more efficient and smoother operation.
- 【Package】：1x twist handle, 1x D/S and P/S striker latches 83514 / 83515 combo, 2x key, 1x cable
- 【Cover Protection】: Twisting handle with a cover that can prevent rainwater from entering the lock and prevent dust or other foreign matter from entering the lock and causing blockage.
Bestseller No. 2
Truck Cap Latch T Handle Lock for Leer are Matching Set Universal Truck Topper Camper Shell T-Handle Lock Complete Set Key Alike(Left & Right) - Universal T-Handle Complete Set for truck caps, toppers, camper shells, and tonneau covers, RV etc.
- Package Includes: two t-handles (clockwise and counter clockwise), two dust covers, two cam plate spacers, two steel t-handle cams (left and right) and four keys and four screws.
- Pls Note: Dust Covers are made to be tight so you need to pull hard to put it on, and peel open the dust cover instead of take it down in daily uses.(Pls check the pic)
- Matching Set with 4 keys total, Keyed alike .And Keyed alike for every 200 sets and different for the next shipment, So you will most likely(more than 98%) to get the same keys if you order 2 sets or more at a time.
- Zinc die cast with a black powder coat finish
Bestseller No. 3
Bzumperyz Replacement Part for LEER Twist Handle Kit 113436-100XQ, 700, 100XL & Latches 83514/83515 with 2 Keys - ✴️【Application】Lock mechanism broken? Lock is jammed? Find it difficult to lock/unlock？Keys’ get missing? ----such locking problems of your truck caps could be easily solved. Change it and better protect your property with this easy lock.
- ✴️【Fitment】Replace for Leer 100XL, 100XQ and 700 for your topper or tonneau.
- ✴️【Quality】Made of high-quality material, this kit ensures its reliability with no compromise to its performance.
- ✴️【Package】1* twist handle; 1* D/S and P/S striker latches 83514 / 83515 combo; 2*key; 2*cable
- ✴️【Friendly Service】 A full return is available within 30 days if you are not satisfied; we also offer a 12-month warranty from the date of purchase to make sure that you have good experience.
Bestseller No. 4
C16-09209 16 inch 38lb/169N Gas Strut Shock Spring Lift Support for Leer Camper Shell Truck Topper Cap Canopy Door Pickup Window Snugtop Replacement Parts, C1609209, C16-33277, C16-33309, Set of 2 - 【Camper Shell Replacement Part】The 16 inch gas strut compatible with camper shells truck topper cap canopy door windows toolbox snugtop replacement parts. before purchasing, please ensure to buy the same gas strut replacement part based on the original oem number of the gas strut.
- 【Interchange Part Numbers】C1609209, C16-09209, 21577-002, SE150P40M10, C16-33309, C1633309, C16-33277, C1633277, C16-14195, C1614195, 82906, 691012-34, 691012 34, SE150P40M10, TAG# 62388 or 82906. Before making a selection, you can find a similar interchange part number on the original gas struts cylinder as a reference.
- 【16 Inch Gas Strut Specifications Guide】The extended length of the gas struts measured from ball center to ball center is 15.71 inch, compressed length measured from ball center to ball center is 9.80 inch, shaft connection: Nylon ball socket 10mm, body connection: Nylon ball socket 10mm.
- 【Package Includes】The package includes 16 inch gas struts*2.
- 【Experience AUCLIDIS】Enjoy our top-tier service with a 12-month replacement guarantee, at the same time, we have a dedicated customer service team online to provide you with prompt assistance.
Bestseller No. 6
82792 Truck Cap 100XQ 65" Topper All Glass Rear Door Bottom Seal Fits for Leer Truck Cap 100XQ 65" # 82792 - Product Performance：This seal is a replacement for the older LEER 100XQ all glass rear doors that do not have a door skirt. The seal comes with a strip of premium 3M double sided tape attached and ready to install on the bottom of the rear door. 1-3/8" Tall
- Compatible With: Fits 3/16" thick glass. Once installed the flap will hang down 1/2" from bottom of glass door. It may not be applicable to all LEER 100XQ truck covers. Please confirm whether your equipment initially had this seal
- For leer truck cap seal High Quality Material: Using high-quality rubber, it has excellent durability and wear resistance, and can withstand high impact and heavy loads in hot and cold environments
- For leer truck cap seal Easy To Install: Firstly, remove all tape/residue from the old seals and glass. Then, clean the glass with alcohol to remove all dirt and oil. Next, peel off the backing from approximately 2 inches of 3M tape on both ends of the seal and push the seal to the edge of the glass. Once the seal reaches the desired position, gently peel off the remaining backing from the tape. Finally, press it evenly onto the glass on the side of the seal and tape to help bond
- Note: If the seal seems too tight when closing the door against the tailgate, you may have to adjust the rear door up at the hinges. This seal may not be applicable to all LEER 100XQ truck covers. Please confirm whether your equipment initially had this seal
Bestseller No. 8
Pamagoo 16 Inch 38 Lbs Shocks, C16-09209 A.R.E Truck Cap Struts, C16-33309 15.7 in 38# Gas Spring Lift Support for Snugtop Camper Shell Window Leer Topper Canopy Replacement Parts, 2 Pack - [Gas Struts Info] Extended length: 15.7 inch, Compressed length: 9.4 inch,Force: 38lbs Per Strut, this pair of 15.7" 38# gas struts can support the lid weighing 30-42 pounds
- [Replacement Part for] 21577-002 gas shock lift support perfectly work as the replacement parts for leer truck cap camper window, snugtop are camper shell topper canopy,etc
- [Fitment Part Number] Pamagoo 15.7" 38lb truck cap struts are direct replacement for your original struts with interchange number C1609209, C16-09209, 419697,C16-33309, C1633309, C16-33277, 82906, 691012-34, 21577-002, SE150P40M10
- [5-Minute Installation] Just need a screwdriver to remove the clips on the old shocks, and the new ones just snap right on.No more propping the lid with a stick
- [Pamagoo Care] We provide 24 hours online selection & installation guide and 18 months quality support for every customer, please check the fitment part number on your old struts or measure your lid weight as per instruction to ensure buy correctly
Bestseller No. 9
Vanshly 1 Pair 83515 & 83514 Truck Cap Rotary Latch Compatible with Leer 100XL/XR/XQ/180XL 700 tonneau - Part Number：83515 driver side and #83514 passenger side
- Compatible with ：These are used on Leer 100XR, 100XL and 100XQ 180XL truck caps. They are also used on the Leer 700 fiberglass tonneau cover.
- Fitment Type：Direct Replacement
- Package Include：This kit will come with a both driver side and passenger side latch and no hardware
- Service：If you encounter problems during the installation process, please contact us immediately.
Bestseller No. 10
OTTOPO Truck Cap Lock Replacement Parts Fits Leer are Camper Shell Accessories T Handle Latch Door Lock for Pickup Topper Keyed Alike(Left & Right) - Standard T-Handle Locks, Wide Compatibility: These locks feature T-handles ( 90 clockwise and 90 counter clockwise) designed to fit most dual lock truck caps, especially compatible with most Leer，Are and Century Fiberglass Truck Caps. Simple construction ensures easy operation.You might need to widen the holes if your car's current ones are too small.
- Key Alike & Easy Installation: Both locks use the same key, eliminating the need to distinguish keys and preventing lockout if one key is lost. Easy to install, you can simply mount the lock on the inside of the doors with some screws.
- Mounting lugs: 1.5" apart, 3/8" deep. The installation position for the lock requires three pre-drilled holes. The center hole must have a diameter larger than 8/5 inches (approximately 40.6 mm), while the two smaller holes on the sides should be larger than 8.2 mm. If the holes are too small, you will need to enlarge them before installation.
- Premium Materials, Durable Construction: Built to last in harsh outdoor conditions, these locks resist corrosion and rust. The lock body is crafted from zinc alloy die-cast with a matte black powder coating, offering weather resistance and a comfortable grip. The lock rod and lock bar are made from sturdy zinc-plated steel for superior strength.
- Product Dimensions: Please review the dimension diagram (see Product Image 2) carefully before purchase to ensure compatibility with your truck cap. Lock Rod Length: 2”， Lock Bar Length: 2-3/4"，Refer to Product Image 3 for all other dimensions.
With our guide, you can find the best leer cap replacement parts available on the e-commerce market. We make use of Big Data and AI data to compile this list, so it is highly accurate.
The process of creating this content was challenging, but our team persevered through it to bring you the best possible results. We read user reviews and look at what buyers think about each product so that your buying experience will be satisfying.
