Visit our site to find reviews on pit boss replacement parts. We have the top best pit boss replacement parts comparison 2026 and you can make an informed decision!
That’s why we’ve taken 67560 reviews from top experts and organized them according to our rankings for you.
Bestseller No. 1
Tbgrepts Upgrade Replacement Parts Kit for Pit Boss and Traeger Pellet Grill Smoker, Include Auger Motor 2.0 RPM, Induction Fan, Igniter Hot Rod with Fuse, Fire Pot Accessories with Screws - 【Great Value Pit Boss Replacement Kit】This pit boss replacement part kit comes with upgrade 2.0 rpm auger motor replacement parts, induction fan replacement, fire pot and igniter hot rod with fuse and screws. Can not only help you cook tasty but also cave your time.
- 【2.0 Rpm Auger Motor with More Power】Compare with the 1.6 auger motor, our upgrade 2.0 gear motor replacement has more power to start the auger, and the motor turns faster to feed the pellets in the burn pot quickly. With high-temperature resistance wire to get your grill to reach higher temps fast, you need a fast and high-temperature resistance motor, that is our 2.0 RPM auger motor with more power, you will save more time to keep pumping out delicious meals.
- 【No Noise Induction Fan】Our induction fan replacement for pit boss is no noise and is easy to install. Circulates hardwood smoke through the cook chamber, adding to the convection factor versatility of your grill for evenly cooked wood-fired food. Our pit boss pellet grill induction fan replacement comes with high-temperature resistance wire, using our replacement induction fan to keep the barbecue firing away.
- 【7 Hole Fire Burn Pot】Made of heavy-duty 14 gauge steel to ensure long-lasting use, more substantial and durable. The set screw holes are tapped to fit your pit boss exactly, so it is easy to replace. 7 Holes increase the contact of pellets with air and give pellets enough room to burn. Wood-fired food is delicious for any meal so don't stop burning.
- 【Hot Rod Igniter with Fuse】Comes with a fuse to avoid the breaker tripping. This igniter hot rod replacement for pit boss grill smokers is shrouded by a stainless steel sleeve that heats up for rapid pellet ignition. 200 watt/120 volt, 21" wire lead hot rod goes into the base of the firepot quick connecting, which will ensure your grill continues to operate effectively.
SaleBestseller No. 2
FCCUM 2.0RPM Auger Motor Parts Compatible with Traeger, Pit Boss, Camp Chef Wood Pellet Grills Smokers, Replacement AC120V 60Hz 2 Pole Universal Barbecue Feeding Gear - 【UNIVERSAL 2.0PRM AUGER MOTOR】- Compatible with all Traeger, Pit Boss (EXCEPT PTG ), Camp Chef, Z grill wood pellet grill smokers. Replace 120V 60Hz 2 Pole heavy duty grill auger motor Parts
- 【UPGRADED 2.0RPM AUGER MOTOR】- 2.0RPM auger motors with more power to make the grill start faster, run smoother, have fewer temperature fluctuations, and reduce clogging when using augers.
- 【HIGH QUALITY AUGER MOTOR】- Auger Motor wire made of UL1332/18AWG Pep High-Temperature resistant materials, Longer lasting, more durable, and better suited to your grill.
- 【EASY TO INSTALL】- Plug and Play, replacement burned out or neglected motors, get your grill running again.
- 【FRIENDLY SERVICE】- If you have any questions, please contact us through Amazon Messenger.
Bestseller No. 3
Heavy Black Enamel Fire Pot and Hot Rod Ignitor Kit Replacement Parts for Traeger and Pit boss and Camp Chef Pellet Grill (Enamel Fire Pot and Hot Rod) - 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐥𝐞 𝐰𝐢𝐭𝐡: black enamel fire pot and igniter replacement parts for all traeger grills (𝐞𝐱𝐜𝐞𝐩𝐭 𝐩𝐭𝐠). also fits most pit boss, pellet pro, z grills, pellet grills (𝐧𝐨𝐭 𝐞𝐯𝐞𝐫𝐲 𝐦𝐨𝐝𝐞𝐥). if our bonus screws can't work on your grill. 𝐃𝐨𝐞𝐬𝐧’𝐭 𝐟𝐢𝐭 𝐓𝐫𝐚𝐞𝐠𝐞𝐫 𝐓𝐢𝐦𝐛𝐞𝐫𝐥𝐢𝐧𝐞-𝐓𝐫𝐚𝐞𝐠𝐞𝐫 𝟓𝟕𝟓!
- 𝐃𝐢𝐦𝐞𝐧𝐬𝐢𝐨𝐧𝐬 & m𝐚𝐭𝐞𝐫𝐢𝐚𝐥- 𝐭𝐨𝐭𝐚𝐥 𝐥𝐞𝐧𝐠𝐭𝐡 𝐨𝐟 h𝐨𝐭 r𝐨𝐝: 30". high density cartridge heating element, 𝟐𝟎𝟎𝐖/𝟏𝟐𝟎𝐕 wire lead. black enamel Fire Burn Pot: 5" x 3 1/2" x 3 3/4", 7 Large air holes, 14 gauge steel wall.
- 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 - i𝐧𝐜𝐥𝐮𝐝𝐞𝐬 𝟏 𝐱 e𝐧𝐚𝐦𝐞𝐥𝐞𝐝 f𝐢𝐫𝐞 p𝐢𝐭, 𝟏 𝐱 h𝐨𝐭 r𝐨𝐝 i𝐠𝐧𝐢𝐭𝐞𝐫, 𝟏 𝐱 f𝐮𝐬𝐞 𝐚𝐧𝐝 𝟏 𝐱 s𝐞𝐭 𝐨𝐟 s𝐜𝐫𝐞𝐰𝐬,𝟏 𝐜𝐨𝐦𝐩𝐥𝐢𝐦𝐞𝐧𝐭𝐚𝐫𝐲 𝐚𝐬𝐡 𝐜𝐥𝐞𝐚𝐧𝐞𝐫（𝐓𝐡𝐞 𝐞𝐧𝐚𝐦𝐞𝐥 𝐟𝐢𝐫𝐞 𝐩𝐨𝐭 𝐡𝐚𝐬 𝐚 𝐥𝐢𝐟𝐞𝐬𝐩𝐚𝐧 𝐭𝐡𝐚𝐭 𝐢𝐬 𝟑 𝐭𝐢𝐦𝐞𝐬 𝐥𝐨𝐧𝐠𝐞𝐫 𝐭𝐡𝐚𝐧 𝐨𝐭𝐡𝐞𝐫 𝐭𝐲𝐩𝐞𝐬, 𝐨𝐟𝐟𝐞𝐫𝐢𝐧𝐠 𝐠𝐫𝐞𝐚𝐭𝐞𝐫 𝐝𝐮𝐫𝐚𝐛𝐢𝐥𝐢𝐭𝐲 𝐚𝐧𝐝 𝐢𝐦𝐩𝐫𝐨𝐯𝐞𝐝 𝐜𝐨𝐦𝐛𝐮𝐬𝐭𝐢𝐨𝐧 𝐩𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞. ）
- 𝐆𝐫𝐞𝐚𝐭 r𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭- The quality of this product is superior to any of its counterparts on the market because most products on the market are made of pig iron, which is very prone to rust. 𝐎𝐮𝐫 𝐩𝐫𝐨𝐝𝐮𝐜𝐭 𝐢𝐬 𝐞𝐧𝐚𝐦𝐞𝐥𝐞𝐝 𝐚𝐧𝐝 𝐭𝐡𝐞𝐫𝐞𝐟𝐨𝐫𝐞 𝐥𝐞𝐬𝐬 𝐩𝐫𝐨𝐧𝐞 𝐭𝐨 𝐫𝐮𝐬𝐭 𝐚𝐧𝐝 𝐦𝐨𝐫𝐞 𝐝𝐮𝐫𝐚𝐛𝐥𝐞 𝐭𝐡𝐚𝐧 𝐩𝐢𝐠 𝐢𝐫𝐨𝐧!
- 𝐄𝐚𝐬𝐲 𝐭𝐨 𝐢𝐧𝐬𝐭𝐚𝐥𝐥- plug and play wiring, took only about 𝟏𝟎 𝐦𝐢𝐧𝐮𝐭𝐞𝐬 to replace. If you're uncertain how to replace the rod, look it up on 𝐲𝐨𝐮𝐭𝐮𝐛𝐞 , set the new hot rod to protrude 𝟏/𝟖 𝐭𝐨 𝟏/𝟒 𝐢𝐧𝐜𝐡 into the fire pot.
Bestseller No. 4
Flame Broiler Kit for Pit Boss Pro Series 1100(PB1100PS1) Pellet Grills - Pitboss Heat Deflector Includes Slide Cover and Bottom Kit, Pit Boss Smoker Grill Replacement Parts, Pitboss Heat Diffuser - Perfect Fit: Great replacement parts for Pit Boss Pro Series 1100 from Lowes pellet grills, PB1100PS1. The Slide Cover measures 10"L x 15 ½"W - Part PB1100PS1-4 and the Bottom measures 32"L x 15 ½"W - Part PB1100PS1-5, ensuring an exact fit for your Pit Boss Pro Series 1100, 72760.
- 24/7 Compatibility Assistance: Verify your grill model against our list before purchasing, or send it to us via "Looking for specific info?" for compatibility confirmation and we'll respond within 24 hours.
- High-Quality Materials: The grill replacement parts for Pit Boss made of heavy duty steel thick and good quality, ensuring long-lasting performance and use.
- More Effortless Choice: The flame broiler slide cover and bottom kit like the original, money saving option to restore your Pit Boss instead buy a new smoker.
- Enhanced Grilling: The grill parts for Pit Boss include a flame broiler main plate and slider that provide more flame control and heat distribution, allowing for perfect searing.
Bestseller No. 5
YAOAWE 2 Pack Hot Rod Igniter Kit Replacement for Pit Boss, Pellet Grill Igniter Rod Heating Element Compatible with Pitboss, for Traeger & Camp Chef Grill, with 2 Fuses - PRODUCT FEATURES: To avoid pellet grill hot rod stopping working after a few BBQ sessions, only 1/8 to 1/4 inch 120V 200W ignitor rod should be showing in the firepot, Replacement Part Models: 70112, PG24-21
- COMPATIBALE WITH: The grilling igniter for Pit Boss pellet grill models - 340, 440, Classic, Austin XL, Sportsman 1100, Pro Series II 1150PS2 etc. Work with Camp Chef models. Details refer to the second picture. NOTE: Not Fit for Pit Boss LOCKHART Model
- EASY TO INSTALL AND DURABLE: The replacement igniter parts was a direct install. Made of durable materials and perfect fit. This hot rod kits can keep the fire going when you are on a BBQ with your friends or family, important replacement accessories
- PACKAGE INCLUDED: Ignition rod ×2, Screw ×2, Fuse ×2. The metal part of the igniter is 4.3" and the wire lead is 24", which can help you to replace the old or bad pellet bbq ignitor, very convenient for you
- NOTE: Please make sure to check whether your grill and smoker models are compatible. Many meat probes look very similar, but are compatible with completely different models. Don't buy the wrong one
Bestseller No. 6
Digital W/LCD Display Control Board Replacement Parts Kit Compatible with Pit Boss Pellet Grill Smoker Austin XL,Tailgater,Classic, Include Meat Probe, Temperure Sensor Probe, and Igniter Hot Rod - 【Perfect Pit Boss Replacement Kit】Compatible with Pit Boss Austin XL 1000(PB1000XLW1), Classic 700(PB700FBW2 ), and Tailgater 340(PB340TGW1).（Note: Not Compatible with Pit Boss Vertical Pellet Smoker/Refridgerator Grill and other brand grill )
- 【Controller Hold Temp Better】Resolved lost control of the temp you experienced with the original controller. With a robust temperature range of 200 to 475°F, gives you the ability to fine-tune temp control in 25F/50F increments. Hold temp better than the original, the digital W/LCD Display is bright and easy to read.
- 【Hot Rod Igniter with Fuse】Comes with a fuse to avoid the breaker tripping. This igniter hot rod replacement for pit boss grill smokers is shrouded by a stainless steel sleeve that heats up for rapid pellet ignition. 200W/120V, 21" wire lead hot rod goes into the base of the fire pot quick connecting, which will ensure your grill continues to operate effectively.
- 【Accurate Reading Probe】Our pit boss grill food probe replacement and RTG thermostat replacement are made of food-grade stainless steel to monitor meat temperature or grill smoker temperature. The BBQ temperature probe replacement buck design provides accurate, fast temperature sensing and alerts you to temperature changes in seconds.
- 【AFTER-SALES SERVICE】100% money-back customer satisfaction, no matter if you have any questions when you receive the pit boss pellet smoker grill replacement parts, you can contact us directly, and we will give you a satisfactory reply within 24 hours and give you a satisfactory solution.
SaleBestseller No. 7
Control Board for Pit Boss Pellet Grill， for Pit Boss PB440D2/PB1150G etc Grill,with W/LCD Display Adjustable Temperature Size - COMPATIBILITY: Pit Boss AC03P9, compatible with the following Pit Boss grills: Pit Boss PB440D2/PB1150G/PB850G/PB550G/PB820/Pro 1100 grills.
- EASY TO USES:Using LED high-definition display. It is also easy to read in direct sunlight. Show cooking temperature in the grill! Restore your grill to its original operating efficiency with this part.
- CONTROL TEMPERATURES:Eight cooking temperature settings (200 to 475 degrees) and smoke mode. You can also adjust the smoking mode through the "P" setting.
- PROBE USE:The plug-in connection port(s) on the front of the Control Board are for a Meat Probe(s). When a meat probe is connected, the temperature is displayed on the LCD Screen.
- Service : If you have any questions,you could contact us through Amazon Messenger
Bestseller No. 8
Upgrade Digital Thermostat Control Board Replacement Parts Kit Compatible with Pit Boss Pellet Grill Smoker PB700,340,440,820, Include Meat Probe, Temperure Sensor Probe, Igniter Hot Rod and Fuse - 【Great Value Pit Boss Replacement Kit】This pit boss pellet smoker grill replacement part kit comes with an upgraded digital thermostat controller replacement plus meat probes port, 1pcs RTD probe, 1pcs waterproof meat probe, and 1pcs igniter hot rod with fuse. Can not only help you cook tasty but also save your time.
- 【Upgraded Controller Hold Temp Better】Resolved lost control of the temp you experienced with the original controller, gives you the ability to fine-tune temp control in 25F/50F increments. Hold temp better than the original, the digital LED temperature display is bright and easy to read, adding the meat probes as a new feature for your smoker.
- 【Hot Rod Igniter with Fuse】Comes with a fuse to avoid the breaker tripping. This igniter hot rod replacement for pit boss grill smokers is shrouded by a stainless steel sleeve that heats up for rapid pellet ignition. 200W/120V, 21" wire lead hot rod goes into the base of the firepot quick connecting, which will ensure your grill continues to operate effectively.
- 【Accurate Reading Probe】Our pit boss grill food probe replacement and RTG thermostat replacement are made of food-grade stainless steel to monitor meat temperature or grill smoker temperature. The BBQ temperature probe replacement buck design provides accurate, fast temperature sensing and alerts you to temperature changes in seconds.
- 【AFTER-SALES SERVICE】100% money-back customer satisfaction, no matter if you have any questions when you receive the pit boss pellet smoker grill replacement parts, you can contact us directly, and we will give you a satisfactory reply within 24 hours and give you a satisfactory solution.
Bestseller No. 9
Fire Burn Pot and Hot Rod Ignitor Kit Replacement Parts for Traeger & Pit Boss Wood Pellet Grill Smoker, Fire Burner Pot with Screws and Fuse - 【COMPATIBILITY】: This fire burn pot compatible with Traeger Grills (EXCEPT PTG) and most Pit-boss pellet grills (not all).NOTE: Not Fit For Traeger D2 Direct Drive Pellet Grills Smoker Pro 575 & 780, Ironwood 650 & 885, Silverton 620 & 810, Timberline 850 &1300 (Gen 2 only), Century 885. Pit Boss Pro 1150/1160 Pellet Grill.
- 【DIMENSIONS】: Fire Burn Pot: 5" x 3 1/2" x 3 3/4", 7 Large air holes, 14 gauge steel wall. Total length of Hot Rod: 30". High density cartridge heating element, 200W/120V wire lead.
- 【PACKAGE】: Includes 1*fire burn pot,1*hot rod ignitor, 1*fuse, 1*set of screws. Fire burnr pot made of high strength steel, more substantial and durable to ensure long-lasting use.
- 【EASY TO INSTALL】: Plug and Play, this burn pot can be assembled in a short time with basic tooling. Set the new Hot Rod to protrude 1/8 to 1/4 inch into the fire pot. TIP: if our bonus screws can't work on your grill, please use your old screws.
- 【GREAT REPLACEMENT】: This replacement parts will make your grill continues to operate effectively , save your time and money. if you have any questions, Please contact us, we will solve it for you within 12 hr.
Bestseller No. 10
Flame Broiler Kit for Pit Boss Pellet Grills in PB820, PB850 Series with Flame Broiler Adjusting Bar - Includes Slide Cover and Bottom Kit, Grill Replacement Parts for Pit Boss 820D3, 850PS2 and More - Perfect Fit: Great replacement parts for Pit Boss grills featuring an ADJUSTING BAR on the left or right side, such as PB820D3, PB820ME, Sportsman 820, PB820CS1, PB820FB1, PB820 Matte Black, PB850CS1, PB850PS2, PB850G, and more.
- 24/7 Compatibility Assistance: Verify your grill model against our list before purchasing, or send it to us via "Looking for specific info?" for compatibility confirmation and we'll respond within 24 hours.
- High-Quality Materials: The grill replacement parts for Pit Boss made of heavy duty steel thick and good quality, ensuring long-lasting performance and use.
- More Effortless Choice: The flame broiler slide cover and bottom kit like the original, money saving option to restore your Pit Boss instead buy a new smoker.
- Enhanced Grilling: The grill parts for Pit Boss include a flame broiler main plate and slider that provide more flame control and heat distribution, allowing for perfect searing.
With our guide, you can find the best pit boss replacement parts available on the e-commerce market. We make use of Big Data and AI data to compile this list, so it is highly accurate.
The process of creating this content was challenging, but our team persevered through it to bring you the best possible results. We read user reviews and look at what buyers think about each product so that your buying experience will be satisfying.
