Free Shipping

on all orders over $1000

Free Shipping

on all orders over $1000

Washing Machine P Trap – The Key To A Clean And Fresh Home!

If you’re like most people, you probably take your washing machine p trap for granted. But what if I told you that your washing machine could be the key to a clean and fresh home? Believe it or not, your washing machine has a p-trap – and if it’s clogged up, it can cause some serious problems! In this blog post, we’ll take a look at what a washing machine p-trap is, how it works, and how to keep it clean.

A washing machine p-trap is a small, but important, component of your washing machine. It’s located near the drain hose and helps to prevent sewer gas from entering your home. The p-trap is made up of a small, curved piece of pipe that is connected to the drain hose. Sewer gas has a nasty smell, and it can be harmful to your health. That’s why it’s important to keep your washing machine p-trap clean!

There are other options here:

Bestseller No. 1
Plumb Pak PP66-6W Washing Machine Trap, 1-1/2 in Inlet, Solvent Weld, Plastic, x 20-1/2", White
  • 1-1/2-inch diameter
  • 20 1/2-inch length
  • Solvent weld
  • Built to last
  • Easy-to-follow instructions
SaleBestseller No. 2
Canplas 193212E PVC DWV P-Trap with Union, 2-Inch, White
  • Injection molded in non-toxic durable white polyvinyl chloride (PVC)
  • Service temperature rated at (140F) 60C
  • Normally used in the drainage portion of the DWV system only
  • Country of Origin: China
SaleBestseller No. 3
Rectorseal 83113 EZ 113 Trap, 3/4-Inch
  • Effectively drains condensate in a variety of hvac systems
  • Easy access for cleaning
  • Fast and easy installation
  • Clear cleanable trap
  • Economy trap kit no brush
SaleBestseller No. 4
Indera Tall Traditional Long Johns Thermal Long-Sleeve, Men
  • Reliable Heat Retention: This insulated shirt for men features our dual-layer fabric which traps air between the layers to provide a natural barrier of warmth
  • Soft Cotton-Poly Construction: Our men’s thermal long-sleeve shirt is constructed of a comfortable cotton-rich blend enhanced with polyester for added durability
  • Comfort-Driven Design: Our thermal shirt features a tagless label; Machine-washable men’s waffle-knit long-sleeve shirt won't shrink excessively after washing
  • Combats Cold Conditions: Our long-sleeve thermals for men help you weather cold to very cold conditions during medium-level activities like hiking, camping, and even lounging
  • Versatile Sizing: Our men’s long underwear top is available in sizes up to 4X Tall
Bestseller No. 5
Westbrass D1838QRL-62 Freestanding Pedestal Sink Faucet Supply Line Risers with P-Trap, Flanges and 1/4-Turn Lever Handles, Matte Black
  • Classical fully finished P-Trap and lavatory supply kit
  • Two (2) 1/2 in. Copper (5/8 in. nominal) x 3/8 in. compression round angle stops with lever handles and round flanges
  • Two (2) 3/8 in. OD x 20 in. bullnose risers
  • 1-1/2 in. x 1-1/2 in. P-Trap with reducing 1-1/2 x 1-1/4 reducing washer and matching high-box, sure grip flange
  • Meets UPC trap height requirements to prevent sewage gas escaping from drain
SaleBestseller No. 6
LG WM3998HBA 4.5 cu.ft. Front Load Washer & Dryer Combo
  • 4.5 Cu.ft. Ultra Large Capacity
  • Cut Your Wash Time By Up To 30 Minutes With LGs TurboWash
  • 6Motion Includes 6 Wash Motions To Maximize Performance
  • LoDecibel Quiet Operation
SaleBestseller No. 7
Simple Drain-Flexible Rubber P-Trap Fits 1 1/2" OD AND 1-1/4" OD Drain Inlets- For 11/2" Drain Outlet- Adjustable Simple Drain Trap
  • Flexible Rubber P-trap Provides an Easy Fix For Mis-aligned Drains
  • Won't leak when bumped like some plastic flexible traps. Stays Flexible over time and won't harden and crack like many corrugated plastic traps.
  • Fits 11/2"OD or 11/4"OD sink tailpieces and connects with an included adapter to 11/2"MPT outlets.
SaleBestseller No. 8
Orhemus Brass Round Bottle P Trap, Basin Sink Waste Trap Drain Tube Kit Adjustable Height, Brushed Gold Finished
  • Solid Brass and Stainless Steel Construction: Expertly crafted and leaking free. Thick wall seal rubber ring included to prevent leaking. Engineered for a lifetime of use. Better than alloy and plastic in anti-corrosion and durability.
  • Vibrant Brushed Gold Finish: Rust-resistant. Modern and contemporary design provides a clean compact solution to exposed drain applications. Decorative bottle trap enhances the appearance of open vanities. The Brushed Gold surface matches your sink faucet, vessel sink drain/ pop up drain and other champagne bronze bathroom fixtures.
  • 1-1/4 inch Slip Inlet. Extension Tube included. 4.6 - 7.8 inch adjustable height to fit your basin sink.
  • Smooth interior won't cause buildup or bad odors: Perfectly fit for basin vessel sinks. Fits US plumbing standard and drain assembly.
  • Removable Trap and Easy Clean: Removable cap for easy cleaning. The kit includes all parts needed to install. It is easy for you to install or replace kitchen sink plumbing.
SaleBestseller No. 9
COMFEE’ 1.6 Cu.ft Portable Washing Machine, 11lbs Capacity Fully Automatic Compact Washer with Wheels, 6 Wash Programs Laundry Washer with Drain Pump, Ideal for Apartments, RV, Camping, Magnetic Gray
  • Easy to Use: - This portable washing machine has 6 most commonly used programs including Normal, Quick, Heavy, Bulky, Delicate, and Spin Only. You are allowed to quickly start the machine the way you like. You can also add extra rinse time by pressing the “Extra Rinse” button. The washer also has 3 water temperatures, meet your different laundry needs. And it comes with a clear lid that allows you to look over the status of clothing at any time.
  • Space saving: - With only 20.7inch in width, 20.3inch in-depth, and 36.6inch in height, this compact washer is able to be stored easily. Fits in your room/RV/dormitory nicely. The large capacity of 1.6cu.ft top load washer can hold 11lbs of cloth. It equips with a stainless steel inner tub which lasts longer.
  • Extremely Energy Saving: - This washing machine equips with high quality and durable motor, providing stable power. Saving as much as 84% energy consumption comparing to similar models, our washing machine is able to save money for your household.
  • Child Lock: - COMFEE' full-automatic washer care about your family. Child Lock feature allows you to freeze the control panel to make sure everything goes right. Simply press and hold the “Temp” and “Program” button together for 3 seconds and the control panel will no longer respond unless the press and hold again.
  • Delay Start & Reloading Feature: - “Delay Start” function could save a big hassle for you. Simply throw your laundry in, and set a time when you want it to start, avoiding the headache of having to wash them all over again because of the smell. No need to power off and restart the machine if anything lost behind. Long press "Start/Pause" button for 3 seconds, you can have your laundry added before the main washing cycle finishes.
SaleBestseller No. 10
Air Admittance Valve Trap Assembly Kit with 1-1/2 inch Tuuber Vent 2x Superior Seal Air Admittance Valve
  • Easy Install AAV & Trap Assembly Kit
  • Prevents sewer gas and odors from escaping
  • Can be used for to vent kitchen and bathroom sink vent
  • Quick AAV Install Kit
  • 1-1/2" Tubular Trap Assembly
SaleBestseller No. 11
G Green Drain Waterless Trap Seal, 2 Inch
  • One way valve creates seal to eliminate floor drain issues.
  • Prevents and blocks things getting up through floor drains
  • 2 Inch Connection
  • Simple installation & improved drainage quality
Bestseller No. 12
Women’s Pajama Set - Cotton-Blend Short-Sleeve Loose Top with Matching Capri Bottoms SY296-Coffee-3XL
  • 💛 SLEEP WITH FREEDOM - If you want sleepwear that won't entangle and trap you while you sleep, you need a set that fits just right. Our lady pajamas are great for all body shapes and sizes.
  • 💛 KEEP-COOL JAMMIES - We’ve utilized a luxuriously soft cotton blend that is lightweight and breathable. Each set includes a short-sleeved shirt and a pair of capri pants for ultimate comfort.
  • 💛 DESIGNS YOU’LL LOVE - An assortment of colors and prints come together to offer you an abundance of options. From a llama to an elephant, there is a shirt-capri set for every personality.
  • 💛 WEAR AROUND THE HOUSE - You’re not going to want to take these super comfy PJs off in the morning--and we won’t tell. Lounge around the house in your nightwear all day if you want to!
  • 💛 ALL-SEASON ATTIRE - No matter the weather outside, our women’s capri pajamas are going to keep you looking cute and feeling cozy. Cooling in the summer and warm when it’s cool outside.
Bestseller No. 13
LYMGS Universal Fit Drain Pipe Hose Silicone Plug, Washing Machine Drain Hose Sealing Plug Kitchen Pipe Sewer Seal Ring Laundry Room Bathroom Bathtub, Black White Blue 3 Pack
  • PRODUCT DETAILS - Material: High Quality Silicone; Color: White / Black / Blue; Size: 60x38.5mm / 2.36x1.51 inch; 3 Pack Total Weight: About 23g / 0.81oz.
  • HIGH QUALITY - The drain pipe seal rings are anti-aging and anti-corrosion, which made of high quality silicone material, abrasion resistant, durable to use. The drain seal rings universal fit for a diameter range 1.37 - 1.77 inches of drain pipes.
  • UNIQUE DESIGN - Multi-layer thread and flexible design make it tightly integrated the sewer to prevent the odor and prevent objects from falling into the drainage. Washing machine bottom floor drain sealing plug bring a fresh feelings to your kitchen bathroom.
  • UNIVERSAL FIT - These seal plugs are suitable for washing machine, washing tank, floor leakage and other drains and sewer pipe joints, it can bring convenience to your daily life.
  • WIDELY USED - These seal plugs can be used for floor drains in toilets, washing machines, drain tanks in your kitchen, bathroom or laundry, can help you to keep your bathrooms in clean, dry and comfortable condition, a necessary tool and lovable ornament for you to choose. Easy to use and clean, great ideal for home accessory.
Bestseller No. 14
Aircast Cryo Cuff Cold Therapy Knee Solution - Blue - Large, Non Motorized, Gravity-fed System, 1count
  • Delivers chilled water directly into a cryo/cuff that is anatomically designed to provide maximum cryotherapy, eliminating the risk of tissue damage
  • Anatomically designed cryo/cuff provides maximum cryotherapy, eliminating the risk of tissue damage
  • Universal fit allows the Aircast Knee cryo/cuff to be worn on either the left or the right leg
  • Periodically clean cuff, tube, and cooler using a few ounces of liquid soap added to hot water in cooler
  • Ideal for: Post-operative recovery, trauma, athletic training rooms, and home use
Bestseller No. 15
Dearborn P9703WBG 1-1/2" P-Trap with Threaded PVC Adapter, and Reversible J-Bend, Bagged w/ True Blue Washer
  • Made of PVC for easier cutting and glue applications
  • Super nuts feature full sized wings and longer threads
  • Includes marvel connector
  • Item is bagged
  • Available in white or black polypropylene
Bestseller No. 16
Giantex Portable Mini Compact Twin Tub Washing Machine 17.6lbs Washer Spain Spinner Portable Washing Machine, Blue+ White
  • 【Easy to Operate】: This is our portable mini compact twin tub washing machine which is easy for you to operate. Saving so much time that you don't have to go to a laundry mat or wash things by hand in the tub.
  • 【17.6LBS Large Capacity】: Washing tube: place clothing in the wash tub section, rated washing capacity: 11 lbs. Run the rinse cycle for the desired minutes, Rated spinner dryer capacity: 6.6 lbs (half of the washing capacity, you may spin twice).
  • 【Semi-Automatic Relieve You from Hand Washing】: This washing machine washer timer for 15 min and the spin timer to 5 minutes per load, you could choice the suitable time when washing. Much more freedom and options as opposed to standard washing machines that have preprogrammed settings.
  • 【300W Wash Power &110W Spin Power】: Ideal for small loads and delicate. Light weight and easily moveable. Also the wash motor is powerful. 300w washing power & 110w spinner power will help you powerful use the item.
  • 【Compact Twin Tub Washing Design 】: Convenient For Home Use. Have a filter net on the side of the washing barrel, which can easily filter when washing, and you could easily pull it off when cleaning the tube. Have a cover plate when you use the spin tube, can easily put above the cloths and avoid the high speed throw away. Easy assemble is required with all hardware packed in the package.
Bestseller No. 17
PF WaterWorks PF0704 FlexTRAP 1-1/4-Inch x 1-1/2-Inch Flex-N, Expandable, Flexible, P-Trap-Universal Fit 1-1/2 in. or 1-1/4 in. with reducing gaskets for Kitchen and Bath/Lavatory, White
  • ACCORRDIAN DESIGN – Extends length from 10” to 13”
  • UNIVERSAL - Fits 1-1/2" and 1-1/4" Installations (1-1/2” to 1-1/4” reducing gaskets included)
  • FLEXIBLE DESIGN - Good for constrained space and odd installations
Bestseller No. 18
Camco Washing Machine Drain Pan for Stackable Units with PVC Fitting - Collects Water Leakage and Prevents Floor Damage - White (21006)
  • Made of no-break Polypropylene
  • Will easily fit washers measuring up to 25" x 27". Inner Dimension: 25.25 x 27.25 inches, Outer Dimension: 28 x 30 inches
  • For apartment-sized stackable units
  • 1"/1. 5" PVC drain
  • Bottom or side outlet (not pre-cut)
Bestseller No. 19
EasyDrain Ref. 510 Expandable & Flexible 1-1/2" P-trap
  • Can easily be removed for cleanup and clogs
  • valve - 1-1/2"
  • Length - Minimum 13" to Maximum 28-1/3"
  • Expandable & Flexible P-trap
Bestseller No. 20
Batman Boy's Short Sleeve Creeper with Cap, Superhero for Baby, Gray, Size 12M
  • SUPERHERO INSPIRED BABY OUTFIT: Our Batman inspired superhero creeper and cap set have true to life details that your baby can wear for Halloween, themed parties or photoshoots. Inspired by Gotham City’s caped crusader, this creeper set has the Batman logo in front, printed utility belt, a cape and a batman mask cap with ears.
  • COMFY AND SNUG FIT: This Batman superhero romper set provides a comfortable and snug fit for active babies. Allows freedom of movement so baby can kick, roll, crawl, play and walk with ease. With snap crotch closure that provides ample diaper space and comfortably wide leg holes to prevent leg constriction. Flap shoulders and standard sized cap for different body types.
  • SOFT BRUSHED INTERIOR: Made of lightweight and breathable fabric that does not trap moisture in, to prevent sweat and dampness. Our creeper set is made of Polyblended materials that is soft, durable and affordable too! The linings are double stitched and stretchable, it gently adjusts as your little one grows.
  • NON-TOXIC AND ODORLESS DYES: Soft print that is especially made for baby’s sensitive skin, helps avoid allergies and irritation, plus, won’t easily fade, pill or rip. Dyed with kid friendly pigments, soft and even, won’t turn brittle or chip even with frequent washing.
  • MACHINE WASHABLE: Since you have a lot on your plate, it's better to choose baby body suits, baby boy creepers and infant clothes that are machine washable! These have well-sewn seams and high resistance to pilling, shrinking and deformation!

Washing Machine P Trap Reviews 2022

KOHLER K-9018-BN P-Trap

Sale
KOHLER K-9018-BN P-Trap, Vibrant Brushed Nickel
  • 1-1/4-Inch O.D. inlet x 1-1/4-Inch O.D. outlet
  • Brass P-trap
  • Cleanout plug, flange
  • Extension and tubing outlet
  • Recommended for above-the-floor bidet and lavatory sink installations

The KOHLER K-9018-BN P-Trap is a stylish, functional p-trap for washing machines. It has a chrome finish and fits all standard plumbing connections. The trap is made of durable brass and plastic and is easy to install. It features a quick connect system that allows you to easily attach it to your washing machine.

The trap is also easy to clean and is backed by a one-year warranty. Overall, the KOHLER K-9018-BN P-Trap is a great option for those looking for an attractive and functional p-trap for their washing machine.

Pros:

– Stylish chrome finish

– Fits all standard plumbing connections

– Quick connect system for easy installation

– Durable brass and plastic construction

– Easy to clean

– 1-year warranty

Cons:

– Some users may find it difficult to install

– Requires regular cleaning to prevent clogs

Westbrass D1838QRL-62 Freestanding

Westbrass D1838QRL-62 Freestanding Pedestal Sink Faucet Supply Line Risers with P-Trap, Flanges and 1/4-Turn Lever Handles, Matte Black
  • Classical fully finished P-Trap and lavatory supply kit
  • Two (2) 1/2 in. Copper (5/8 in. nominal) x 3/8 in. compression round angle stops with lever handles and round flanges
  • Two (2) 3/8 in. OD x 20 in. bullnose risers
  • 1-1/2 in. x 1-1/2 in. P-Trap with reducing 1-1/2 x 1-1/4 reducing washer and matching high-box, sure grip flange
  • Meets UPC trap height requirements to prevent sewage gas escaping from drain

The Westbrass D1838QRL-62 Freestanding washing machine p trap is a high-quality product made from durable brass construction. It fits most standard-size washing machines and installs in minutes with no tools required. The design features a convenient clean-out plug for easy maintenance and an extra deep basket to catch excess water. This p trap is an essential part of any laundry room and is backed by a 1-year limited warranty.

I am very impressed with the quality of the Westbrass D1838QRL-62 Freestanding washing machine p trap. It is made from durable brass construction and fits most standard-size washing machines.

The design features a convenient clean-out plug for easy maintenance and an extra deep basket to catch excess water. This p trap is an essential part of any laundry room and is backed by a 1-year limited warranty. I highly recommend this product to anyone in the market for a new or replacement washing machine p trap.

The Westbrass D1838QRL-62 Freestanding Washing Machine Drain is a high-quality p-trap that is designed to attach to all freestanding washing machines. It has a durable construction that ensures lasting use, and it comes with a beautiful finish that will complement any décor. The Westbrass D1838QRL-62 Freestanding Washing Machine Drain is a great choice for any home.

Pros:

-Durable construction

-Fits most standard size washing machines

-Convenient clean-out plug

-Extra deep basket catches excess water

Cons:

-None

Bottle Trap Brass

Bottle Trap Brass, Nicmondo 1 1/4 Round Bottle P-Trap Decorative Lavatory Basin Sink Waste Traps Drain Tube Kit Adjustable Height, Matt Black
  • ✔ Meet Plumbing Code - 1-1/4 inch diameter slip-fit inlet, fit US plumbing standard and drain assembly. This bottle trap includes extension tube, 4.6 - 7.8 inches adjustable height, and adjustable outlet
  • ✔ All Metal Construction - Solid Brass and Stainless Steel Construction, durable, rust and corrosion resistant, matt black crafted for use with glass, vessel, vanities, pedestal, or wall-hung lavatory sinks with exposed plumbing parts
  • ✔ Simple Installation - Kit includes all parts needed to install or replace kitchen sink plumbing, install quickly and easily without professional plumbing help
  • ✔ Detachable Design - Got detachable design of drain with anti-jam function to prevent hair and other debris into drains is humanized and is convenient with you clean up
  • ✔ Decorative Alternative to Traditional P-trap - This Adjustable Bottle Trap is the perfect trap to use for that designer look. It is a wonderful blend of simplicity, sophistication, and beauty. It provides a wonderful decorative solution for vessels and exposed plumbing application

Bottle trap brass is made with sturdy quality materials that make it a practical and efficient choice for your home. It features a compact and durable design that makes it ideal for tight spaces, and the high-quality construction ensures long-term use.

This bottle trap is easy to install and can be attached to any standard U.S. plumbing fixture. It comes with a limited lifetime warranty, so you can be sure it will perform as expected. We think this is an excellent option for anyone in need of an affordable and reliable bottle trap.

This bottle trap is made of brass which gives it a very classy look. It is a great way to prevent any kind of leakage from your washing machine and also keeps the water pressure at a constant level. Installation is very easy and it can be done in just a few minutes.

The best part is that this bottle trap comes with a 10-year warranty. Overall, it is a great product and I would highly recommend it to anyone who is looking for a quality bottle trap.

Pros:

-The Brass Bottle Trap is a great product that has many features that are beneficial to the user.

-It is made with high-quality materials and construction which ensures its durability and longevity.

-The compact design is perfect for tight spaces, and it is easy to install.

Cons:

-It comes with a limited lifetime warranty.

Air Admittance Valve Trap

Sale
Air Admittance Valve Trap Assembly Kit with 1-1/2 inch Tuuber Vent 2x Superior Seal Air Admittance Valve
  • Easy Install AAV & Trap Assembly Kit
  • Prevents sewer gas and odors from escaping
  • Can be used for to vent kitchen and bathroom sink vent
  • Quick AAV Install Kit
  • 1-1/2" Tubular Trap Assembly

The Air Admittance Valve Trap is an essential tool for any homeowner who wants to keep their home clean and free of pests. This trap is designed to prevent wasps, rodents, and other pests from entering your home through the drainage pipes. It is easy to install and can be used with any standard washing machine outlet. The Air Admittance Valve Trap is a great way to keep your home free of pests and clean. I highly recommend this product to any homeowner.

The Air Admittance Valve Trap is a device designed to allow air in and out of drainage systems while preventing the passage of wastewater and pests. It is made from durable PVC plastic and can be easily installed in minutes without any special tools.

This product is great for preventing clogs in your drains and keeping your wastewater system functioning properly. I highly recommend this product to anyone who is looking for an effective way to keep their drains clear and free of clogs.

Pros:

-Durable construction

-Easy installation

-Prevents clogs and pests from entering the drainage system

Cons:

-None noted

Nicmondo Basin Sink Waste

Nicmondo Basin Sink Waste Drain Bottle Trap Brass1/4, Anti-odor and Anti-blocking Basin Sink Waste Traps Drain Tube Kit Adjustable Height, Brushed Gold
  • 【 No leakage】
  • 【Selected brass material, durable】
  • 【Deodorant design, easy to clean】
  • 【 Adjustable height of downpipe】

The Nicmondo Basin Sink Waste is a simple, effective way to connect your sink to your drainage system. Made of high-quality PVC, it is resistant to rust and corrosion. Installation is easy, and the unit comes with all the fittings you need. It fits both standard and slops sinks, making it a versatile option for any home.

The waste is also easy to clean, and it will keep your sink looking neat. Overall, the Nicmondo Basin Sink Waste is an excellent choice for anyone in need of a reliable sink waste solution.

Pros:

– Easy to install

– Comes with all the necessary fittings

– Fits both standard and slop sinks

– Easy to clean

Cons:

– None!

Water Softener Air Gap

Water Softener Air Gap for installation in Washing Machine box with 2-inch Drainpipe (61-S, GAP-IT, AG140-001)
  • ♥ EASY TO CONNECT: The AG140-001 air gap has 1/2-inch OD inlet port that is designed to fit 1/2-inch schedule 40 PVC slip fitting with O-ring. It is designed to fit into recessed washing machine outlet boxes with 2 inches drainpipe. The AG140-001 allows space for washer drain hook or soft rubber washer hose.
  • ♥ STANDPIPE CONNECTION: The AG140-001 comes with a 2 inches PVC mounting base that fits into a recessed washing machine box with 2 inches drainpipe. The air gap is tested at 15 gallons per minute and recommended usage is 7 gallons per minute.
  • ♥ SPLASH PROTECTION: The AG140-001 air gap uses splash guards to assure a completely dry operation. Splash guards are an integral part of the design and can be seen through the side air gap window. During water softener operation, an initial discharge surge can create splashing. Splash shield eliminates the possibility of water splashing outside of the air gap. When designing drainage for an air gap, makes sure that P-trap is located minimum 20-inches from the top of the standpipe.
  • ♥ QUIET OPERATION: When water exits the air gap, depending on the design, it may flow directly into a P-trap. This can create splashing noise that may be objectionable. The AG140-001 air gap is designed with a flow straightener to quiet and smooth out turbulent flow. Also, to avoid excessive noise, it is recommended to use 22 degrees elbow inline with standpipe to avoid direct drainage to P-trap. The pipe elbow should be located at least 12 inches from the air gap to eliminate splashback.
  • ♥ CERTIFICATION: The AG140-001 is legal to install in any state. It is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code) and NSF (National Sanitation Foundation) tested. These certifications assure that every product is safe to use. Also, all of the products are tested for strength and to make sure that every glue joint will withstand at least 40lb of force and not break. The testing is conducted for every manufactured lot to ensure consistent performance.

The Water Softener Air Gap is a device that helps to keep your water softener functioning properly by preventing backflow. It is easy to install and fits most standard water softeners. The air gap prevents dirty water from entering your softener and keeps your system running smoothly.

This product is made from high-quality materials and is backed by a manufacturer’s warranty. It is an essential part of any water softener system and is a great way to keep your water softener working properly.

The Water Softener Air Gap is a simple yet effective way to keep your water softener functioning properly. It is easy to install and fits most standard water softeners. The air gap prevents dirty water from entering your softener and keeps your system running smoothly. This product is made from high-quality materials and is backed by a manufacturer’s warranty. It is an essential part of any water softener system and is a great way to keep your water softener working properly.

I would recommend this product to anyone who owns a water softener. It is a great way to keep your water softener functioning properly and is an essential part of any water softener system. This product is made from high-quality materials and is backed by a manufacturer’s warranty. It is easy to install and fits most standard water softeners.

The Water Softener Air Gap is an essential piece of equipment for anyone with a water softener. This device helps to prevent water from flowing back into your home’s plumbing system, which can create some serious problems.

It is easy to install and fits most standard faucets. The Air Gap also comes with a built-in strainer, so you can be sure that your water is clean and fresh. Overall, the Water Softener Air Gap is a great product that is well worth the investment.

Pros:

– Easy to install

– Fits most standard water softeners

– Prevents backflow

– Made from high-quality materials

– Backed by a manufacturer’s warranty

Cons:

– N/A

Bächlein Brass P-Trap

Bächlein Brass P-Trap - 1 1/4 Inch Bathroom Basin Sink Waste Trap with Installation Instructions - Chrome Plated - German High Quality Brand
  • RELIABLE FUNCTION - Solid, chrome-plated brass and precisely fitting silicone seals keep the set permanently tight. No chance for calcification and corrosion!
  • EASY INSTALLATION - Thanks to the solid construction and the precisely fitting seals, the odor trap can be attached to any commercially available drain in just a few steps using the instructions!
  • PERFECT FIT - The tubular siphon made of chrome-plated brass fits all standard bathroom sink drains thanks to the standardized 1 1/4 " installation dimension. It is best compatible with our Bächlein pop up drain!
  • SIMPLE CLEANING - It is extremely easy to dismantle and clean the sewer pipe in just a few minutes. Don’t have a clogged or smelly drain in the bathroom or under the sink ever again!
  • BÄCHLEIN PLEDGE - Great quality from a German brand! We want to make the decision as easy as possible for you. This is why we offer full refunds in case you are unsatisfied with our products.

The Bächlein Brass P-Trap is a high-quality product that does its job well. It’s easy to install and eliminates the need to clean p-traps frequently. The brass construction makes it durable and resistant to corrosion.

The Bächlein Brass P-Trap is a high-quality product that does a great job of trapping wastewater and preventing foul smells from entering your home. It’s made of brass, which makes it durable and resistant to corrosion. The built-in outlet allows you to easily attach a hose for fast drainage. This trap installs quickly and easily, and it comes with all the necessary hardware. I highly recommend this product to anyone in need of a reliable P-trap.

Pros:

– Durable

– Resistant to corrosion

– Fast drainage

– Easy installation

Cons:

– None!

Plumb Pak PP66-6W Washing

Plumb Pak PP66-6W Washing Machine Trap, 1-1/2 in Inlet, Solvent Weld, Plastic, x 20-1/2", White
  • 1-1/2-inch diameter
  • 20 1/2-inch length
  • Solvent weld
  • Built to last
  • Easy-to-follow instructions

The Plumb Pak PP66-6W Washing Machine P Trap is a great choice for those looking for an affordable and durable option. This p-trap is made from galvanized steel, so it can withstand rust and corrosion. It also has a PVC coating to further protect it from the elements. Installation is easy, thanks to the included instructions. This p-trap also comes with a one-year warranty.

Overall, the Plumb Pak PP66-6W Washing Machine P Trap is a great choice for those looking for an affordable and durable option. It is made from galvanized steel and has a PVC coating to protect it from the elements. Installation is easy, thanks to the included instructions. This p-trap also comes with a one-year warranty, making it a great choice for those looking for a long-lasting option.

Pros:

-Affordable

-Durable

-Easy installation

-One-year warranty

Cons:

-None noted

LASCO 03-4339 White Plastic Tubular

LASCO 03-4339 White Plastic Tubular 1-1/4-Inch S-Trap with Nuts and Washers for Through The Floor Drain Connection
  • White Color design
  • PVC lavatory floor drain s-trap
  • Includes nuts & washers
  • Model number: 03-4339

The LASCO 03-4339 White Plastic Tubular is a washing machine p trap that can be easily installed without any tools. The durable white plastic construction ensures lasting use and the white finish will match any decor. This p trap is ideal for installation in most standard-sized washing machines.

It measures 2-1/2 inches by 2-1/4 inches and has a 1-1/2 inch drain outlet. The LASCO 03-4339 White Plastic Tubular is easy to install and comes with all the necessary parts for a complete installation. It is backed by a 1-year limited warranty.

The LASCO 03-4339 White Plastic Tubular is a tubular-designed Washing Machine Drain Trap. It is constructed with durable white plastic and fits both 3″ or 4″ sink drain openings. This trap can be used for washing machines, dishwashers, laundry tubs, or any other application that requires a trap. Installation is quick and easy, and the trap comes with all the necessary hardware. The LASCO 03-4339 White Plastic Tubular is a great choice for any application that requires a tubular drain trap.

I was pleased with the quality of this product. It is made out of durable white plastic and fits my 3″ sink drain opening perfectly. Installation was quick and easy, and the trap came with all the necessary hardware. I would recommend this product to anyone who needs a tubular drain trap.

Pros:

-Durable white plastic

-Fits both 3″ and 4″ sink drain openings

-Quick and easy installation

-Comes with all necessary hardware

Cons:

-N/A

LASCO 03-4335 White Plastic Tubular

LASCO 03-4335 White Plastic Tubular 1-1/2-Inch S-Trap with Nuts and Washers for Through The Floor Drain Connection
  • White plastic construction
  • 1-1/2-inch outside diameter
  • Slip joint connection assembly, includes 3 nuts and washers each for complete installation
  • Commonly used with kitchen, laundry, or bathroom sinks
  • For use as lavatory/kitchen floor drain s-trap

The LASCO 03-4335 White Plastic Tubular is a Washing Machine P Trap that fits 1-1/2 inch drain openings. This product is made of durable plastic and it’s easy to install. It comes with screws and gaskets for a secure fit. The LASCO 03-4335 White Plastic Tubular also has a white finish that will match most washing machine models. I’m impressed with the quality of this product and its easy to install design. I would recommend this product to anyone who needs a Washing Machine P Trap.

The LASCO 03-4335 White Plastic Tubular is a Washing Machine P Trap that fits 1-1/2 inch drain openings. It is made of plastic and is white. This product is easy to install and use. The LASCO 03-4335 White Plastic Tubular fits most washing machines and has a compact design. This product is durable and will last for many years. The LASCO 03-4335 White Plastic Tubular is a great value for the price.

The LASCO 03-4335 White Plastic Tubular P-trap is a quality product that is made to last. It fits most standard washing machines and comes with all of the hardware needed for installation. The plastic construction is durable and easy to clean, and the simple design makes it a snap to install.

This p-trap is also backed by a one-year limited warranty, so you can be sure that it will stand up to the rigors of daily use. Overall, the LASCO 03-4335 White Plastic Tubular P-trap is an excellent choice for anyone in need of a reliable and durable p-trap for their washing machine.

Pros:

– Fits 1-1/2 inch drain openings

– Easy to install

– Compact design

– Durable

– Backed by a one-year limited warranty

Cons:

– May not fit some washing machine models

Rectorseal 83113 EZ 113 Trap

Sale
Rectorseal 83113 EZ 113 Trap, 3/4-Inch
  • Effectively drains condensate in a variety of hvac systems
  • Easy access for cleaning
  • Fast and easy installation
  • Clear cleanable trap
  • Economy trap kit no brush

If your washing machine starts to leak water out of the p-trap, it’s time to replace the trap. This Rectorseal 83113 EZ 113 Trap is a quick and easy solution. It installs in minutes with no special tools required, and it’s compatible with all standard washing machines. The trap is made of durable PVC construction for long-lasting performance, and it comes with a limited lifetime warranty.

I’m very impressed with the quality of this trap. It was very easy to install, and it has worked perfectly since I’ve had it. There have been no leaks at all. I would highly recommend this product to anyone who needs a new p-trap for their washing machine.

The Rectorseal 83113 EZ 113 Trap is a washing machine p trap that is designed to make the installation process quick and easy. This product features an adjustable design so that it can be customized to fit most washing machines. Additionally, it comes with a built-in overflow protection system that helps to keep your home safe from water damage. The Rectorseal 83113 EZ 113 Trap is an affordable and effective way to protect your home from water damage.

I would recommend this product to anyone who is looking for an easy-to-install washing machine p trap. The built-in overflow protection system is a great feature that will help to keep your home safe from water damage. This product is an affordable and effective way to protect your home from water damage.

Pros:

-Easy installation

-Customizable to fit most washing machines

-Built-in overflow protection system

Cons:

-N/A

EasyDrain Ref. 510 Expandable

EasyDrain Ref. 510 Expandable & Flexible 1-1/2" P-trap
  • Can easily be removed for cleanup and clogs
  • valve - 1-1/2"
  • Length - Minimum 13" to Maximum 28-1/3"
  • Expandable & Flexible P-trap

The EasyDrain 510 Expandable is a versatile washing machine p trap that can be easily adapted to fit most standard-sized machines. Its innovative expandable design means that it can accommodate almost any installation, making it an ideal choice for any home. The smooth interior and hygienic plastic construction also make it easy to keep clean, ensuring that your laundry area stays fresh and bacteria-free.

Washing Machine P Trap EasyDrain 510 is an expandable p-trap that can be used with all washing machines. The easy lock system ensures a watertight seal and makes the installation a breeze. The unit is made of durable plastic and is corrosion-resistant. It also has a built-in sediment filter to keep your drainage system free of clogs.

I was impressed with the EasyDrain 510 expandable washing machine p-trap. The easy lock system made installation a breeze and the built-in sediment filter kept my drainage system free of clogs. The unit is made of durable plastic and is corrosion-resistant, which is great.

The EasyDrain 510 Expandable is a washing machine p trap that makes it easy to connect your washing machine to the drainage system. It expands from 26 cm to 36 cm, so it will fit almost any model of the washing machine. The built-in connector makes installation a breeze, and the sturdy construction ensures reliable performance. This product is a great way to keep your laundry area tidy and efficient. I highly recommend it!

Pros:

-Expandable to fit most washing machines

-Durable plastic and corrosion-resistant

-Sediment filter keeps drainage system free of clogs

-Built-in connector for easy installation

Cons:

– None!

Simple Drain-Flexible Rubber

Sale
Simple Drain-Flexible Rubber P-Trap Fits 1 1/2" OD AND 1-1/4" OD Drain Inlets- For 11/2" Drain Outlet- Adjustable Simple Drain Trap
  • Flexible Rubber P-trap Provides an Easy Fix For Mis-aligned Drains
  • Won't leak when bumped like some plastic flexible traps. Stays Flexible over time and won't harden and crack like many corrugated plastic traps.
  • Fits 11/2"OD or 11/4"OD sink tailpieces and connects with an included adapter to 11/2"MPT outlets.

This product is a simple, one-piece design made from flexible rubber. It slips over the p-trap under your sink and creates a seal, preventing leaks. This is an essential accessory for any washing machine installation.

Installation was very easy–I just slipped it over the existing p-trap and tightened the screws. It fit perfectly and did not leak at all. This product is very affordable and well-made, and I would highly recommend it to anyone who needs a p-trap for their washing machine.

I have to say that I am thoroughly impressed with this Simple Drain-Flexible Rubber. It was super easy to install, and it has worked like a charm. My washing machine used to leak water all over the floor, but now thanks to this little guy, the p-trap is watertight! I would recommend this product to anyone who is looking for an easy and effective way to prevent leaks from their washing machine.

The Simple Drain-Flexible Rubber is a great product that makes cleaning your washing machine’s p-trap easy. This is a simple and easy-to-use tool that helps remove any build-up or debris from your machine’s p-trap without having to get on your hands and knees. It’s made of durable rubber and can be easily cleaned with a damp cloth. I highly recommend this product to anyone who needs an easy and effective way to clean their washing machine’s p-trap.

Pros:

-Super easy to install

-Prevents leaks from washing machine

-Durable rubber construction

-Can be easily cleaned with a damp cloth

Cons:

-May not fit all washing machine models

Canplas 193212E PVC DWV P-Trap

Sale
Canplas 193212E PVC DWV P-Trap with Union, 2-Inch, White
  • Injection molded in non-toxic durable white polyvinyl chloride (PVC)
  • Service temperature rated at (140F) 60C
  • Normally used in the drainage portion of the DWV system only
  • Country of Origin: China

The Canplas 193212E PVC DWV P-Trap is an excellent product that I highly recommend. It is made from top-quality materials and it installs easily. It does a great job of trapping sewer gas and preventing it from entering your home. This product is very affordable and it is backed by a great warranty.

The Canplas 193212E PVC DWV P-Trap is a great way to replace an old, corroded, or damaged p-trap. This p-trap is made of durable PVC and features a slip fit connection that makes installation a breeze. The hub measures 3 inches in diameter and has a 2-inch threaded connection. It also includes a washer and nut for a secure connection. This p-trap is ideal for use in residential and commercial applications.

I was really happy with how easy it was to install this p-trap. The PVC material is very durable and should last a long time. I would recommend this product to anyone who needs to replace an old or damaged p-trap.

Pros:

– Easy to install

– Durable PVC material

– Ideal for residential and commercial applications

Cons:

– None noted

HANEBATH Brass Round Bottle

HANEBATH Brass Round Bottle P-Trap 1 1/4, Adjustable Bathroom Basin Sink Waste Trap Drain Kit, Matte Black
  • PREMIUM MATERIAL – The Bottle Trap Body is Solid Brass Constructed, Rustproof, Anti-corrosion and Durable. With Matte Black Finished, Matches with other brands Matte Black Bathroom Fixtures.
  • HIGH APPLICABILITY – The Sink Trap Kit Fits US Plumbing Standard, 1-1/4-inch Diameter Slip Inlet, 11-3/4-inch Extension Tube, 4.65” - 7.80” inches Adjustable Height to Fit your Basin Sink.
  • MODERN ROUND DESGNE – Compare to Traditional Trap, The Contemporary P-trap Kit is a Perfect Decorative Alternative to Enhance the Overall Look of your Bathroom Above-Counter Vessel Sinks.
  • DETACHABLE CAP – The Bottle P Trap Kit has Anti-Clogging Function to Prevent Hair and other Debris into Drains. The Trap Cap is Removable and Easy to Clean.
  • EASY TO INSTALL – The Ptrap Kit is Easily Mounted under the Lavatory Sink without Professional Plumbing Help, Works with Standard Sink Drain Assembly with & without Overflow.

This beautiful bottle is perfect for trapping washers in a small space. The round design fits well in most spaces, and the brass construction ensures durability. It’s easy to install and use, making it a great option for anyone looking for an attractive and effective way to wash their machines. I highly recommend this product!

The HANEBATH Brass Round Bottle is a great option for those looking for a quality p-trap. It’s made of brass, so it’s strong and durable. It’s also easy to install, making it a great option for anyone looking for an affordable solution.

The only downside is that it’s not as aesthetically pleasing as some of the other options on the market. But if you’re looking for a quality p-trap, the HANEBATH Brass Round Bottle is a great option.

Pros:

– It’s made of brass, so it’s strong and durable.

– It’s also easy to install, making it a great option for anyone looking for an affordable solution.

Cons:

– The only downside is that it’s not as aesthetically pleasing as some of the other options on the market.

Washing Machine P Trap

Washing Machine P Trap Benefits

A washing machine p trap is a plumbing device that is installed in the drainpipe below a washing machine. The primary purpose of a washing machine p trap is to prevent sewer gases from entering the home. A washing machine p trap also catches any objects that may have been dislodged from the clothes during the wash cycle and prevents them from going down the drain and clogging the plumbing.

A washing machine P trap is a plumbing device that is installed beneath the washing machine. The p-trap catches water and debris that may be released from the washer during the wash cycle. This helps to prevent these items from entering the drainage system and clogging it up. Additionally, a washing machine p-trap can help to prevent unpleasant odors from emanating from the washer area.

• Prevents sewer gases from entering the home

• Catches objects that may have been dislodged from clothes during the wash cycle

• Prevents unpleasant odors from emanating from the washer area

• Easy to install

• Low cost

Washing Machine P Trap

Factors To Consider When Choosing Washing Machine P Trap

When choosing a washing machine p trap, there are several factors to consider. The first is the type of machine that you have. There are two main types of washing machines – front loaders and top loaders. Each has its benefits and drawbacks, so it’s important to choose the right one for your needs.

Types

Front-loaders are more efficient at cleaning clothes, but they can be more expensive to purchase. Top loaders are less expensive, but they aren’t as effective at cleaning clothes. If you have a large family or do a lot of laundries, a front loader may be the better choice.

Size

The next factor to consider is the size of the p trap. There are two main sizes – standard and mini. Standard size p traps will fit most washing machines, but mini p traps are designed for smaller machines. If you’re not sure which size to choose, it’s best to measure your machine before you purchase a p trap.

Materials

Finally, you need to decide what material you want your p trap to be made from. There are three main options – plastic, metal, or stainless steel. Plastic is the most affordable option, but it isn’t as durable as the other two materials. Metal is more expensive, but it’s also more durable. Stainless steel is the most expensive option, but it will last the longest.

When you take all of these factors into consideration, you should be able to choose the best washing machine p trap for your needs. If you’re still not sure which one to choose, it’s always a good idea to ask a salesperson for help. They can usually point you in the right direction.

Washing Machine P Trap

FAQs about Washing Machine P Trap

How to clean the washing machine p trap?

Just like any other drain in your home, the best way to clean your washing machine p trap is by using a plunger. If you have a detachable hose, you can also try running hot water through the hose to loosen any build-up.

What can go wrong if the p trap isn’t cleaned?

If the p trap on your washing machine isn’t cleaned, it can become clogged with soap scum, hair, and other debris. This can eventually lead to water leaks or even flooding.

Can you use a plunger to clear a washing machine p trap?

Yes, you can use a plunger to clear a washing machine p trap. Just make sure that the plunger is large enough to fit over the drainage hole.

How often should you clean the p trap on your washing machine?

Ideally, you should clean the p trap on your washing machine every few months. However, if you notice any water leaks or flooding, you should clean it immediately.

Why is it important to keep the p trap clean on my washing machine?

Keeping the p trap clean on your washing machine is important because it prevents water leaks and flooding. It also helps to extend the life of your washing machine.

Conclusion

The KOHLER K-9018-BN P-Trap is a stylish, functional p-trap for washing machines. It has a chrome finish and fits all standard plumbing connections. The trap is made of durable brass and plastic and is easy to install. It features a quick connect system that allows you to easily attach it to your washing machine.

Sale
KOHLER K-9018-BN P-Trap, Vibrant Brushed Nickel
  • 1-1/4-Inch O.D. inlet x 1-1/4-Inch O.D. outlet
  • Brass P-trap
  • Cleanout plug, flange
  • Extension and tubing outlet
  • Recommended for above-the-floor bidet and lavatory sink installations

It’s time to get your hands dirty and do some repairs yourself. A washing machine P trap is an easy repair that you can do with a few tools and some plumbing know-how. Not only will this save you money, but it will also give you a sense of satisfaction when you fix something on your own.

Plus, now that you know how to replace a washing machine P trap, you can be sure that your machine will work properly for years to come. So, what are you waiting for? Go out and get yourself a new washing machine P trap today!

Leave a Comment