Visit our site to find reviews on springs window fashions replacement parts. We have the top best springs window fashions replacement parts comparison 2026 and you can make an informed decision!
That’s why we’ve taken 52948 reviews from top experts and organized them according to our rankings for you.
Bestseller No. 3
8 Pcs Window Latch Locks Spring Loaded Window Tilt Latch Replacement Part by JPKTA,Vinyl Plastic Construction,Window Parts and Hardware 2 Inch Hole Center Spacing Sliding Lock White - PRODUCT INTRODUCTION: 4 Pairs spring-loaded vinyl window tilt latch, totaling 8 pieces, including 4 pieces left-hand latch and 4 pieces right-hand latch.【NOTE】Distinguish the left and right signs on the side with springs, as shown in the third picture. “左”=left，”右“=right
- GOOD QUALITY: Sliding window tilt latch is made from high-quality plastic,and it has been well tested by the manufacturer,has good wear resistance,long service life, can save you time and money
- WARM TIP: Before purchasing, please carefully check if the product size meets your requirements (whether the hole spacing corresponds to the holes on your original window sash, otherwise you may need to drill new holes)This product is not equipped with screws, and the product size is 3 x 1 inch,2 inch hole center spacing.Please do not apply too much force during use to prevent the spring from popping out
- WIDE APPLICABILITY: Widely used in single and double hung vertical sliding window sash panels, designed to tilt downwards and inwards from the top for cleaning purposes
- TIPS: Please carefully check the model and size before purchasing to ensure they meet your needs,your satisfaction is our unremitting pursuit
Bestseller No. 4
50 Pcs Window Screen Tension Spring, Durable Corner Mount Flat Window Spring Stainless Steel Window Screen Clips, Holding Screen Sliding in Aluminum Channel Safely and Securely, ¼” Wide 2-3/4” Long - Hold Window Screens Securely: our window corner mount flat spring can firmly fix the screen in the aluminum slot, prevent the screen from falling off, and eliminate the shaking and vibration caused by small defects on the screen frame, no need to buy a new window, just replace the spring, save money.
- Flexible and durable: Our window screen spring clip adopts high-quality stainless steel structure, flexible and durable, can resist weathering corrosion, not easy to break and rust, and can maintain long-term elasticity, not easy to deformation.
- Suitable Size: each tension spring corner clip measures approx.1/4'' in width, and 2-3/4'' in length, suitable for window frames in 3/8 inch or 7/16 inch thick, available in kinds of screens mitered, straight-cut and extruded. Note: please check the size of your window screen frame before ordering.
- Easy to Install: these window screen holder clips are easy to install, no need extra tools. You just detach the window screen frame, remove the old clips and install the new screen clips onto the edge of the window screen.
- Package Includes: you will get 50 pieces corner flush window springs, enough to meet your long-term use and replacement needs.
Bestseller No. 5
12 Pieces Window Latch Replacement Snap in Window Locks Vinyl Spring Loaded Parts and Hardware White Plastic Sliding Latch for Home Accessories (12 Pieces) - Sturdy window latch locks replacement: the window latch replacement is made of quality plastic, it is reliable and resistant to breakage or deformation, safe for long term use, so you can use it in confidence; Please check the size before purchasing
- Size: our plastic window latch replacement is 2-4/5" x 2/5" x 3/5", please check the size carefully before purchasing; Featured with classic white round head style, which will coordinate with your home decor and will not affect the overall decoration of your house
- Enough to share: you will get 6 pairs of tilt window replacement parts, 12 pieces in total, including 6 left hand locks and 6 right hand locks, enough for you to share with friends and family
- Where to place: the white plastic construction of the replacement window latches is widely applied for single or double hung vertical sliding windows, designed to inwards and downwards from the top for cleaning
- Easy to install: the window latch replacement is simple to operate, it is lightweight and portable, quick and easy to install, taking little time and saving effort in your everyday life
Bestseller No. 6
Window Latch Locks Window Parts and Hardware Tilt Latch Plastic Construction, Spring Loaded, 2 Inch Hole Center Spacing Sliding Lock Replacement (4 Pieces) - Strong and Quality: spring loaded window tilt latch is made of plastic, reliable and not easy to break or deform, safe and odorless, which can serve you for a long time; Note that this product is not equipped with screws, the product size is 3 x 1 inches, please check the size before purchasing.
- Match with Your Furniture Style: with classic color, this sliding window tilt latch is harmonious with your home decoration style, will not affect the overall decoration style of the house
- Sufficient to Share: you will get 2 pairs of tilt latch, totally 4 pieces, including 2 pieces left hands and 2 pieces right hands, enough for you to share with friends, family
- Diverse Applications: plastic construction is widely applied for single and double hung vertical sliding sash panels and is designed to tilt inward and downward from the top for cleaning
- Easy to Install: spring loaded sliding window tilt latch is easy to operate, lightweight and portable, quick and simple to install, no need to spend too much time, labor-saving and practical in our daily life; WARNING: This lock helps restrict access but cannot guarantee child safety. Always supervise children and secure hazardous items out of reach
Bestseller No. 7
WRS Series 37 QuickTilt Tandem Coil Spring Window Balance – #15 (29–30.99 lbs, Dual Coil) – Constant Force Design with Pre-Assembled Pivot Shoe for Tilt Windows – Balance Support Hardware - DUAL-COIL TANDEM LIFTING POWER: Designed for mid-weight tilt-style single-hung and double-hung windows, the WRS Series 37 QuickTilt Tandem Coil uses a dual constant-force spring system to deliver stronger lift and smoother travel than single-coil assemblies. This product features a #15 coil rating and supports 29–30.99 lb sashes. Ideal for residential windows needing extra lifting force while maintaining quiet, controlled movement.
- CONSTANT FORCE SPRING TECHNOLOGY: This coil spring balance uses a constant-force mechanism that maintains steady tension throughout sash travel—no pulleys or cords to wear out. The result is smooth, consistent window operation and extended component lifespan.
- DURABLE AAMA CLASS 3 QUALITY: Built from galvanized steel for corrosion resistance and long-term strength, each QuickTilt balance is AAMA Class 3 verified and precision-tested through thousands of open-close cycles. Coil housing measures 1-9/32″ wide with a 17/32″ coil spring for a precise, reliable fit.
- PRE-ASSEMBLED FOR EASY INSTALLATION: Arrives ready to install with the coil and pivot shoe pre-assembled, fitting directly into standard tilt window tracks. Designed for DIY or professional repairs, it offers fast, accurate setup and long-term dependability.
- TRUSTED SINCE 1989: WRS Window Repair Systems has over 30 years of experience supplying reliable, high-quality hardware. Trusted nationwide by homeowners, contractors, schools, and property managers for dependable repairs and long-lasting performance.
Bestseller No. 8
Prime-Line F 2642 Vinyl Spring-Loaded Replacement Window Tilt Latch Pair, 1-11/16” Hole Center, White (1 Pair) - TILT LATCH REPLACEMENT – These spring-loaded replacement latch parts feature a unique wrap-around design that attaches to the top rail and side stile; each package includes one right-hand and one left-hand tilt latch with fasteners
- EASY TO INSTALL – Installation is quick and easy; this tilt window latch can be used on aluminum single- and double-hung vertical sliding sash panels that are designed to tilt-in and down from the top
- STRONG AND DURABLE – Constructed of vinyl plastic and white in color, this spring-loaded small window latch is strong, durable, and made to last; replace old or broken window tilt latches to maintain safety and security in your home
- DIMENSIONS – This window tilt latch is 2-1/4 inch wide x 3/4 inch deep with a 1-11/16 inch top mounting hole center; for further dimensional information, please see the line drawing
- NOTE - Please refer to the line art drawing for dimensions and compare to your needs before purchasing
Bestseller No. 9
Amazing Drapery Hardware Spring Loaded Cord Tensioner for Cord Loops - Ivory, Wall or Floor Mount - 1 Pack - VERSATILE USAGE: Ideal for cord loops on draperies, vertical blinds, and continuous corded traverse rods.
- FLEXIBLE MOUNTING OPTIONS: Designed for both wall or floor installation to suit various window treatment configurations.
- ENHANCED SAFETY FEATURE: The spring-loaded design maintains cord tension, minimizing the risk of dangling cord hazards.
- DURABLE AND STURDY: Measures 6 inches tall from the bottom of its base, crafted for durability and reliable use.
- SIMPLE INSTALLATION PROCESS: Features 2 installation holes at the base for a straightforward setup.
Bestseller No. 10
WRS Series 37 QuickTilt Tandem Coil Spring Window Balance – #18 (35–36.99 lbs, Dual Coil) – Constant Force Design with Pre-Assembled Pivot Shoe for Tilt Windows – Balance Support Hardware - DUAL-COIL TANDEM LIFTING POWER: Designed for mid-weight tilt-style single-hung and double-hung windows, the WRS Series 37 QuickTilt Tandem Coil uses a dual constant-force spring system to deliver stronger lift and smoother travel than single-coil assemblies. This product features a #18 coil rating and supports 35–36.99 lb sashes. Ideal for residential windows needing extra lifting force while maintaining quiet, controlled movement.
- CONSTANT FORCE SPRING TECHNOLOGY: This coil spring balance uses a constant-force mechanism that maintains steady tension throughout sash travel—no pulleys or cords to wear out. The result is smooth, consistent window operation and extended component lifespan.
- DURABLE AAMA CLASS 3 QUALITY: Built from galvanized steel for corrosion resistance and long-term strength, each QuickTilt balance is AAMA Class 3 verified and precision-tested through thousands of open-close cycles. Coil housing measures 1-9/32″ wide with a 17/32″ coil spring for a precise, reliable fit.
- PRE-ASSEMBLED FOR EASY INSTALLATION: Arrives ready to install with the coil and pivot shoe pre-assembled, fitting directly into standard tilt window tracks. Designed for DIY or professional repairs, it offers fast, accurate setup and long-term dependability.
- TRUSTED SINCE 1989: WRS Window Repair Systems has over 30 years of experience supplying reliable, high-quality hardware. Trusted nationwide by homeowners, contractors, schools, and property managers for dependable repairs and long-lasting performance.
With our guide, you can find the best springs window fashions replacement parts available on the e-commerce market. We make use of Big Data and AI data to compile this list, so it is highly accurate.
The process of creating this content was challenging, but our team persevered through it to bring you the best possible results. We read user reviews and look at what buyers think about each product so that your buying experience will be satisfying.
